F series double rail Reflow soldering technology parameters | ||||||
Series | F series double rail | |||||
Model | CY-F820 | CY-F1020 | CY-F1220 | |||
Heating zones | UP 8 / down 8 | Up 10 / down 10 | Up 12 / down 12 | |||
Cooling zones | Up 2 /down 2 or UP 3 / down 3(optional) | |||||
Heating zone length | 2900mm | 3600mm | 4400mm | |||
PCB maximum width | Rail type:400mm Belt type: 550mm | |||||
Rail wide adjust range | 50-400mm | |||||
Transport direction | L→R(R→L) | |||||
Fixing method of transport guide rail | Front(optional:back end) | |||||
Conveyor height | Belt:900±20mm,Chain:900±20mm | |||||
Transmission way | Chain+ belt | |||||
Conveyor speed | 300-2000mm/Min | |||||
The power supply | 3-phase 380V 50 / 60Hz | |||||
Starting power | 35Kw | 48Kw | 68Kw | |||
Normal work consumed power | Approx.7.5Kw | Approx.8.5Kw | Approx.10Kw | |||
Heating up time | About 15-20minutes | |||||
The temperature control range | Room Temperature-350℃ | |||||
Temperature control mode | Full computer PID closed loop control, SSR drive | |||||
The whole machine control mode | Computer +PLC | |||||
The temperature control precision | ±1℃ | |||||
The deviation of PCB temperature distribution | ±1-2℃ | |||||
Cooling way | Air machine: air cooling, nitrogen machine: water cooling | |||||
Abnormal alarm | Abnormal temperature (ultra high or ultra low after constant temperature) | |||||
Three color light | Yellow - temperature rise; Green - constant temperature; Red anomaly | |||||
Weight | Approx.1700Kg | Approx.1900Kg | Approx.1900Kg | |||
Dimensions(mm) | 5050×1400×1450 | 5750×1400×H450 | 6480×1400×H450 | |||
Exhaust air requirements | 10 cubic / min 2 channel ∮ 200mm |