High -low temperature chamber | ||||||||||
TGDW-100UA | TGDW-150UA | TGDW-250UA | TGDW-500UA | TGDW-010UA | ||||||
Workroom Dimensions(cm) | 50*40*50 | 50*50*60 | 60*60*70 | 80*70*90 | 100*100*100 | |||||
Inner chamber volume(v) | 100L | 150L | 252L | 504L | 1000L | |||||
Outer Diemension W*D*H(cm) | 98*95*160 | 98*105*170 | 108*112*180 | 128*125*200 | 148*155*210 | |||||
Packing Size | 113*110*175 | 113*120*185 | 123*127*195 | 133*140*215 | 163*160*225 | |||||
G.W(kg) | 340 | 370 | 430 | 460 | 600 | |||||
Temperature Range | A:-20℃-150℃ B:-40℃-150℃ C:-60℃-150℃ D:-80℃-150℃ | |||||||||
TemperatureFluctuation | ≤ ±0.5℃ (standard) | |||||||||
Temperature Evenness | ≤ ±2℃ | |||||||||
Temperature Deviation | ≤ 1℃ | |||||||||
Accuracy | 0.1℃ (standard) | |||||||||
Temperature Rise Speed | 1.0℃~3.0℃/min | |||||||||
Temperature Down Speed | 0.7℃~1.2℃/min | |||||||||
Time needed for heating | RT℃~150℃≤30min | |||||||||
Time needed for cooling | RT℃~-40℃≤30min | |||||||||
The machine noise | ≤72dB(A) | |||||||||
Load on the largest | 100kg,≤20 kg/layer | 150kg,≤26 kg/layer | 260kg,≤30 kg/layer | 260kg,≤40 kg/layer | 300kg,≤60 kg/layer | |||||
Equipment installed power | ~1.95KW | ~2.35KW | ~2.85KW | ~3.5KW | ~4.35KW | |||||
Material | The studio:# SUS304 stainless steel | The outer wall:A3 carbon steel plate with plastic spray/ #SUS304 | ||||||||
Wind Cycling Way | Centrifugal fan-broadband type forced air ciruculation | |||||||||
Refrigeration Way | Single stage compression refrigeration | |||||||||
Refrigerater | French Tecumseh | |||||||||
Refrigerats | R404A USA Dupont environment protection refrigerant | |||||||||
Condesing Way | Air-cooled or water-cooled | |||||||||
Heater | Nickel Chorme Heating Wire Heater | |||||||||
Control Instrument | HLS touch screen | |||||||||
Design Criteria | GJB150.3 GJB150.4 GB/T2423.22 GB10589-89 GB11158-89 | |||||||||
Standard Accessories parts | Observe window(double-deck cavity toughened glass),PL inner chamber,Wet and dry bull gauze, 3 fues, 1 power line |