This product is made of high refined medium viscosity base oil, thickened by complex lithium soaps thickener, added with many kinds of additives.
Excellent extreme pressure and anti-wear properties;
Excellent antioxidant anticorrosive performance, prolongs the service life of the equipment
Excellent high-low temperature properties;
Good compatibility with rubber.
Applicable between -20℃ to +160℃.
It is used for the installation and repair work on CV joints. Will extend the life of the CV joint and the additives will sustain the shock loads encountered in the CV joints.
Item | Unit | Typical Values | Test Method |
Worked cone penetration | 0.1mm | 275 | GB/T 269 |
Dropping Point | ℃ ≥ | 286 | GB/T4929 |
Oil separation by steel mesh | 100℃, 24h % ≤ | 2.6 | SH/T0324 |
Anti-corrosion | 52℃, 48h, grade | PASS | GB/T5018 |
Corrosion | T2 Cooper sheet copper, 100℃, 24h ≤ | No green or black change | GB/T 7326 (B) |
Evaporation | (99℃, 22h) % ≤ | 0.5 | GB/T 0337 |
-20℃~+160℃.
1. Position the grease in a ventilated, favorable temperature room. Protected it from dust and impurities after open, close the drum lid after using.
2. Cleaning the parts of lubrication before using, don't mix using with other grease. If there is a little oil impregnate, blend it before using.