Liyi Environmental Control Temperature Humidity Simulation High Altitude Low Pressure Test Chamber
Liyi Environmental Control Temperature Humidity Simulation High Altitude Low Pressure Test Chamber
Liyi Climatic Chamber is used to test the material characteristic for wire type, skin type, plastic, rubber, cloth, Equiped with a special ventilation regulator for maintain the fresh air inside when heating. This testing machine design with sophisticated air-displacement adjustment device and a digital voltage meter, current meter, watt-hours, the timer can be used to measure the air replacement rate. Horizontal circulatory air supply system and both sides of airflow regulator to ensure the internal temperature uniformity and stability.
|
Model |
LY-280 |
LY-2150 |
LY-2225 |
LY-2408 |
LY-2800 |
|
|
Inner Size W×H×D(cm) |
40×50×40 |
50×60×50 |
50×75×60 |
60×85×80 |
100×100×80 |
|
|
Volume (V) |
80 L |
150L |
225L |
408L |
800L |
|
|
Temp and Hum Range |
A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98% |
|||||
|
Function
|
Fluctuation |
±0.5°C ±2.5%RH |
||||
|
Deviation |
±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH) |
|||||
|
Controller Analytical Accuracy |
±0.3°C ±2.5%RH |
|||||
|
Material
|
Inner Wall |
#SUS 304 Stainless steel |
||||
|
Outer Skin |
#SUS 304 Stainless steel |
|||||
|
Heat Preservation |
High temperature resistant, high chlorine acid b vinegar foam insulation materials |
|||||
|
Refrigeration Way |
Single stage compression refrigeration |
|||||
|
Refrigerator |
French Tecumseh |
|||||
|
Refrigerants |
R4O4A USA DuPont environmental protection refrigerant(R23+R404) |
|||||
|
Condensing Way |
Air-cooled or water-cooled |
|||||
|
Heater |
Nickel chrome heating wire heater |
|||||
|
Humidifier |
Semi-closed steam and wet |
|||||
|
Water Supplying Way |
Automatic cycling water supply |
|||||
Dongguan Liyi Environmental Technology Co., Ltd is a high technology supported production-oriented enterprise who specializes in developing, manufacturing, marketing all kinds of environmental equipment. Our company has advanced technology, experienced technical management personnel and efficient professional service staffs, fine quality management and perfect after-sales service system.
Our company mainly produce simulated environmental tester, plastic and rubber tester etc. on all kinds of materials testing industries. The production base is located in the country’s manufacturing center Dongguan, Guangdong province, China. In order to service our customers better in terms of reducing costs and early delivery, in 2005 we had set up an office in Kunshan, Jiangsu province for Eastern China marketing and servicing.
Liyi deals with customers from more than 150 countries and regions. Meanwhile, we are committed to cooperate with different dealers in different countries and regions in order to offer better service. Our mission is to help every customers establish testing labs to ensure the quality of their products.
Our company will continue to develop, innovate and keep faith. We combine with the international testing standards and the specific demands of customers that may establish a new banner in Chinese testing industry.
During the whole business process, we offer Consultative Selling service.
1)Customer inquiry process:
Discussing testing requirements and technic details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2)Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photoes to show the proucts appearance. Then, confirm the final solution and confirm final price with customer.
3)Order process:
We offer below business term:
|
Accepted Delivery Terms |
FOB, CFR, CIF, EXW, DDP |
|
Accepted Payment Currency |
USD, EUR, HKD, CNY |
|
Accepted Payment Type |
T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow |
|
Nearest Port |
Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired |
4)Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
5)Installation and after sale service:
Defines installing those products in the field and providing after-sales support.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier