Custom liquid silicone rubber to make mold for artificial vagina, dildo sexy doll silicone female mannequin
>>>Other hot sale mold making liquid silicone rubber type,please click the pictures of below
We can provide liquid additional cure silicone rubber with different hardness.
1. For small size and dttailed pattern(within 30cm), 15-20 shore A can be applied, which is easy for de-molding and will not damage the patterns.
2.For the products with medium size, such as 50cm, 25-30 shore A silicone rubber should be used.
3.For products with large size, such as 1m, 35-40 shore A shall be recommend to avoid deformation.
4.If the product is large but features detailed pattern, 30 shore A silicone rubber will be workable.(It will be better to protect the products from deformation to make outer mold.)
Note: All the above products hardness could be customized or adjusted according to customers' requirements.
Applications of liquid silicone rubber
Jingyi Silicone Material Co.ltd. is meanly produce: soap & candle mold silicone; RTV2 liquid silicone rubber for molding; plaster moulding gypsum decorative products mold making white silicone; medical grade skin color silicone liquid rubber for artificial human prosthesis like artifical finger; artificial penis silicone raw material rubber; 3D concrete bricks and Nordic style walll panels flexible molds; garden statues cement molding silicone; these room temperature silicon rubber are with different parameters for various materials of products, such as: polyurethane casting materials mold, high burn resistant resin products, scented stones, wax products, polyester , fimo pulp, paraffin, metal crafts, alloy, and food moulds,transparent insole, food grade nipple, epoxy product, fiber rein forced platic composite products recycling vaccum bag bagging making. There are two-componet, rapid molding liquid silicone rubber, with sound property of high and low temperature resistance,these molds can achieve the unshriking effect, and non-toxic and un pungent. It is of high transpancy and can endure hear to 300℃ -500℃ for our addition high temperature silicone rubber for molding.
We can provide liquid additional cure silicone rubber with different hardness.
1. For small size and dttailed pattern(within 30cm), 15-20 shore A can be applied, which is easy for de-molding and will not damage the patterns.
2.For the products with medium size, such as 50cm, 25-30 shore A silicone rubber should be used.
3.For products with large size, such as 1m, 35-40 shore A shall be recommend to avoid deformation.
4.If the product is large but features detailed pattern, 30 shore A silicone rubber will be workable.(It will be better to protect the products from deformation to make outer mold.)
Note: All the above products hardness should be adjusted according to customers' requirements.
Package, Storage and Attention:
1. This kind of rubber is packed in 25KG/iron drum and curing agent in 1L /plastic bottle.
2.This product should be sealed and placed in cool place so as to prevent rain and sunlight exposure.
3.The storage period of this product is half a year. If it occurs to be more viscous, stir it and reuse it with the same property. It can be reused after reinspection when it exceed the storage period.
4.The surface of the replicative mold product such as glass, ceramics, resin, wooden ware or some product with coating should be smearred with surfactants (such as detergent, shampoo, soapsuds) . Perfuse or brush the silicone rubber after the water evaporates, which facilitates demoulding.
5.This product is non-dangerous .During the operation, try to prevent any possibility of eyes and skin contact with the curing agent. Wash affected skin thoroughly with soap and water in case of touching it. Flush with clean running water immediately at least for 15 minutes, and consult a doctor if necessary.
6. Why silicone rubber add curing agent after mixing a lot of bubbles?
This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time ,so must pass through the vacuum exhaust bubble treatment.
7.How to improve the service life of the silicone mold?
The way as follwing:
First,we make the mold should be choose a suitable hardness silicone based on product's size.
Second,silicone oil can not be added in silicone because it can make the mold become soft. As well as decrease tensile and tear strength.