SN51- |
025 |
D |
0 |
1 |
A |
P1 |
A |
D |
Expand on |
SN51 |
specification |
||||||||
025 |
Caliber option,025 for DN25 pipe (special pipe) |
||||||||
A |
Battery-powered local display, no output |
||||||||
B |
Pulse signal output, no display |
||||||||
C |
Analog quantity 4-20mA output, no display |
||||||||
D |
On-site display, analog output of 4-20mA |
||||||||
E |
On-site display, 0-10V analog output |
||||||||
F |
On-site display, 1-5V analog output |
||||||||
G |
On-site display, pulse signal output |
||||||||
0 |
No communication and protocol |
||||||||
1 |
· RS485 communication |
||||||||
2 |
· HART |
||||||||
1 |
Seal connection with internal thread (for sizes ≤DN32) |
||||||||
2 |
Flanged connection (for ≥DN15 sizes) |
||||||||
3 |
Sanitary clamp connection |
||||||||
4 |
Quick seal hose couplings |
||||||||
5 |
Sealing connection with external thread (for ≤DN32) |
||||||||
B |
Accuracy 0.5% (for sizes above DN10) |
||||||||
C |
Accuracy of 1.0% |
||||||||
P1 |
Pressure: 16 bar |
||||||||
P2 |
Pressure: 25 bar |
||||||||
P3 |
Pressure: 40 bar |
||||||||
P4 |
Pressure: 63 bar |
||||||||
P5 |
Pressure withstand: 160bar (diameter ≤DN50) |
||||||||
P6 |
Pressure withstand: 250bar (diameter ≤DN50) |
||||||||
P7 |
Pressure withstand: 320bar (diameter ≤DN50) |
||||||||
P8 |
Pressure withstand: 400bar (diameter ≤DN50) |
||||||||
A |
· transducer passive |
||||||||
B |
Break code converter (optional) |
||||||||
C |
Smart converter (optional) |
||||||||
D |
24V |
||||||||
A |
220V |
||||||||
C |
Battery-powered (optional when no output is available only) |
* Please indicate the flow direction of medium, type of medium, pipe diameter and expected *measurement range when ordering. We can help you complete the precise effect at the factory. * For viscous media, please indicate viscosity, temperature and type of media, as well as flow range. The selection table is only available for parameter selection, and the corresponding code is delivered. |