Liquid Baume Degree Concentration Tester For Brine And Sodium Chloride
Introduction
Concentration coefficient: refers to the coefficient of relative density conversion to concentration. The relative density and
concentration of a liquid cannot present an absolute linear relationship, but a certain curve relationship.
This equipment uses unique 4-point curve algorithm converts the relative density and concentration of various liquids. The 4-point curve algorithm is more accurate than the 2-point linear algorithm. At different temperatures, the relative density conversion coefficient of the same liquid is not Similarly, this device has built-in more than 100 groups of liquid (ethanol, methanol, sodium hydroxide, sulfuric acid, nitric acid... etc.) concentration conversion coefficients at different temperatures.
Model | MAY-G150 | MAY-G300 | |
Weighing range | 0.001~150g | 0.01~300g | |
Density/specific gravity accuracy | 0.0001g/cm³ | 0.001g/cm³ | |
Concentration accuracy | 0.01% (accuracy can be set by the user) | ||
Density resolution range | 0.001~99.999g/cm³ | ||
Concentration resolution range | 0.01%~100% | ||
Concentration parameter setting method | Built-in more than 100 sets of sample concentration parameters, one-key switching on the touch screen | ||
Features and Functions:
2. Use a unique multi-point curve concentration measurement algorithm to test the concentration of various chemical liquids (such as alcohol, methanol, sodium hydroxide, sulfuric acid, etc.). Compared with the common two-point linear concentration measurement algorithm on the market, it has more points The curve concentration measurement algorithm has higher accuracy;
3. Built-in temperature setting compensation function, which can quickly set the temperature value of the liquid to be measured, and can also be equipped with a constant temperature device to measure the density/concentration value of the liquid at a specific temperature (such as 25°C);
4. This instrument uses a microcomputer touch screen operation, English parameter settings, the operation is clear at a glance; and each operation step is reversible (for example, if you find which operation step has a problem, you can return to that step and operate again without starting from the beginning);
5. Support user personalized function customization.
Digital display direct reading the following parameters
Application
Chemical solutions (ethanol, methanol, sodium hydroxide, sulfuric acid, nitric acid... etc.), alcohol, oil, water glass,other liquid
Liquid Baume Degree Concentration Tester For Brine And Sodium Chloride
Shenzhen Qun Long Instrument Equipment Co., Ltd. are professional manufacturer who specialized in R&D, producing and selling various density meter and X-ray fluorescence for nearly 11 years.
We are looking for agents all over the world. No agency fees, wholesale and retail are available. All products are one to three years warranty and life-longs maintain.We can offer neutral products without trademark and model.You can also print your company's logo and model number on the instrument for you.
Welcome to reply to discuss cooperation matters.
1.How about quality and warranty of our products?
When you receive a product from Qun Long, it must be debuged by our production staffs,technical staff and warehouse management. And our technical staffs have more than 10 years experience. We can guarantee the warranty for three years from the date of receipt. If our machine fails to perform properly because of defects in materials or workmanship during three years warranty, We will be responsible for fixing or replacing new machine .
2.How about after-sales Service
(1)If errors occur, please refer to the troubleshooting tips of the instruction manual
(2)Please contact with our after-sales service department or distribution in time if can't clear fault
(3)When you contact us with a service problem, we will act within 12 hours and provide solution within 24 hours.
(4)After-sales line : 0755-82596242
(5)If the product have some big troubles and it must be sent back to our factory to repair during its warranty period, you just need to shipping the product to us and we will sent you a new one.The service is excluding if the machine is breakdown caused by following reasons:
a:Wrong operation
b:Fixed or refitted personally
c:The machine itself is not the reason caused breakdown
d:Applying the machine under the serious condition. Such as high temperature, moist, corrosive gas, or vibration.
e:Move or transportation as soon as installed
f:Consumables and easy-loss components
g:Natural disaster
3.How many days can you receive the products?
Product in stock will be sent within 48 hours. Delivery time is about 5-7 days.
4.How to shipping the product?
Product will be sent by International Express by air. Such as DHL, UPS, FEDEX, TNT, SF.
5.What is our return policy?
You are allowed to return goods within 7 days from the date of receipt. To return products,please contact our customer service with your invoice number, the item to be returned and the reason for the return. Goods must be returned freight prepaid. Returns will be subject to a restocking charge. Products can not be returned back when the products have been used or modified.
6.Are we manufacturer made copy product or original product?
We are the original manufacturer for densimerter, Mayzun is our own brand. The model starts with MZ and MAY are belong to us generally.
7.Why choose us?
Qun Long (MAYZUM is our brand) have been specialized in density field since 2009. Qun Long as a professional density meter supplier , has maintained a constant belief:First - class quality , professional technology team and services team,ample supply and prompt delivery.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier