Model No. | Width(mm) | Effecient width(mm) | Total Thickness | Thicekness(mm) | ||||
ASA | GI Steel | XPE | ||||||
T910 | 910 | 840 | 2.4 mm | 0.1 | 0.3 | 2.0 | ||
2.45 mm | 0.1 | 0.35 | 2.0 | |||||
2.5 mm | 0.1 | 0.4 | 2.0 | |||||
T940 | 940 | 880 | 2.4 mm | 0.1 | 0.3 | 2.0 | ||
2.45 mm | 0.1 | 0.35 | 2.0 | |||||
2.5 mm | 0.1 | 0.4 | 2.0 | |||||
Sapnish 1050 | 1050 | 960 | 2.45 mm | 0.1 | 0.35 | 2.0 | ||
2.5 mm | 0.1 | 0.4 | 2.0 | |||||
U1094 | 1094 | 1040 | 2.5 mm | 0.1 | 0.4 | 2.0 | ||
2.6 mm | 0.1 | 0.5 | 2.0 |
Item | Indicators | Result | |||||
Bending | GBT232-2010 | no change | |||||
Boiling Water Resistance | GB5237.4 | no change | |||||
Cupping Test | GB4156 | 11.2mm | |||||
Temperature Resistance | 120℃ for 1hour | no change | |||||
180°Peeling Strength | GB/T7122 | 1.73 N/mm | |||||
Chemical Stability(anti corrosion) | 10% NaOH | no change | |||||
10% H2SO4 | no change | ||||||
Salt Fog Test(anti rust) | 5% Nacl | no change | |||||
Fire Resistance | GB8624 | Class B | |||||
Heat Insulation Test | In the same environment, 250 ° C single-sided irradiation for 4 hours, measuring the surface and bottom temperature values, to obtain the temperature difference, compare the insulation effect. | ||||||
Surface | Bottom | Temperature Difference | |||||
ASP Thermo Sheet (thickness 2.4mm) | 118 ° C | 79 ° C | 39 ° C |