Lexan 8b35 Custom Labels Membrane Keypad Switch
A keypad switch is a touch sensitive device created by the printing, cutting and laminating of precision thin film plastic materials. Low-voltage, low-current momentary electrical contact is made and retained by applying finger-tip force to the front surface of the switch.keypad switches are primarily utilized with microprocessor based control systems found in medical, communication, instrumentation and appliance products.
1.Material : PET /PC
2.Adhesive: 3M467 & 3M468
3.High life time :more than 1million times
4.Pass:ISO9001:2008RoHS.
5.Membrane switch panel W/PCB Board
6.Application:Medical Equipment;Telecommunications apparatus;Telephone systems;Household appliances;Security systems;Point of sale apparatus;Industrial controls
Electronic characteristics | |
Circuit rating | 35V(DC),100mA,1 W |
Contact resistance | 10Ω - 500Ω(According the trace length and materials to confirm) |
Insulation resistance | >100MΩ 250V(DC) |
Contact bounce | ≤5ms |
Dielectric withstand | 250VRms(50 - 60Hz/1 min) |
Life expectancy | flat type≥500 million times,tactile type:≥1001 million times |
Mechanical Properties | |
Operating pressure | flat type 57-284g (2-10 Oz),tactile type 170-397g (6-14 Oz) |
Switch stroke | flat type 0.1 - 0.5mm,tactile type 0.6 - 1.5mm |
Environmental parameters | |
Operating Temperature | -20°C - +80°C |
Storage temperature | -40°C - +85°C |
Humidity | 40°C,90%-95%,240 hours |
Packaing: opp bag and carton ,usually size :24.5*24.5*29
Shipping:DHL,UPS,TNT,Fedex,EMS
Our tiantai electronics is a manufacturer of kepad switch in dongguan for many years. Our capabilities include digital printing, automatic and semi-automatic screen printing, prototyping, inspection, production assembly, in circuit and functional testing, RF/EMI shielding, embossing, texturing, hard coating, graphic design and development assistance, top and sub surface printing. Tactile, non-tactile, polydome, embedded LED's, and backlit graphics are available along with multiple termination options.
1.Drawing format of keypad switch: CAD,CDR,AI format.
2.General membrane panel manufacturing considerations
1)Environmental
a.Will this product be subjected to moisture and /or UV ligh(will it be used inside or outside)?
b.What temperature and humidity range will the product will be exposed to ?
c.What contaminants or chemicals may be the product come in contact with?
2).Mechanical
a.Is tactile reponse required(dome switches)?
b.What type of surface and finish will the switch be laminated to ?
3).Electrical
a.How many contact points will there be?(Number of pins on connector)
b.What type of pin out or matrix will be used?(Common bus,X-Y matrix)
c.Will electrostatic shielding be necessary?
4).Appearance
a.Will edges be exposed,recessed or covered with a bezel?
b.Will embossing of the graphic overlay be required?
c.How many colors will be printed?
Sincerely welcome to visit our factory !!!