Leixa3 Lexia 3 PP2000 AERMOTOR Diagbox V7.8 NECchip is Suitable for PSA Peugeot Citroen Full Chip

KindEditor

Lexia3 Lexia 3 PP2000 AERMOTOR Diagbox V7.8 NECchip is Suitable for PSA Peugeot Citroen Full Chip

New diagnostic scanner PSAPRO for comprehensive Citroen and Peugeot cars diagnostic. PSAPRO diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

PP2000 Software Languages:

English, German, French, Japanese, Chinese, Russian, Arabic, Spanish, Turkish, Danish, Iranian, Greek, Hebrew, Hungarian, Indonesian,

Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatian, Thai

Lexia Software Languages:

English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

AERMOTOR Software Languages:

it combines the languages of PP2000 and Lexia

PSAPRO Test systems:

ENGINE, automatic transmission, air conditioning system, SRS, ABS, ASR, MPL, GM, anti-theft system, OBD-II system, and so on.

PSAPRO Testing functions:

Read fault codes, clear the fault code, dynamic data stream , computer matching program, component testing, etc. It is the maintenance of Peugeot-Citroen car best helper

PSAPRO Models supported:

Peugeot models: 106, 107, 205, 206,207, 306, 307, 308, 309, 405, 406, 407, 408, 508, 605, 607, 806, 807, 1007, 3008, 4007, 5008, ion, HOGGAR, RCZ, BIPPER, PARTNRT, EXPERT, BOXER etc.

Fit for Citroen cars: 

Fit for CITROEN, Elysee,C-QUATRE, Picasso, Xsara and C-Triomphe ,AX, ZX, XM, BERLINGO, C1, C2, C3, C4, C5, C6, C8, C15, DS3, DS4, DS5, and so on.

PSAPRO Supported functions:

Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions as the original dealer use PSAPRO diagnostic tool. The PSAPRO diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

The following diagnostic functions PSAPRO are supported:

1.Read identification

Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

2.Read fault codes

Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").

Program supports report printing or copy to clipboard.

3.Clear fault codes

This function clears all stored fault codes and other diagnostic information.

4.Auto-scan (complete car scan/test)

Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

5.Measured Values

Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

6.Actuator test

Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

7.Lexia3 Programming functions/Adaptation

This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.

Software install PC Requirements:

Hardware requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended)

Lexia and PP2000 supports Windows XP only.

Diagbox supports Windows XP / Vista / 7 / 8 32bit only . (Diagbox is the Latest software from PSA we recommend it to all buyers !)

* For 64 bit systems you will need to run in a virtual machine as VMware.

* For Windows10 request VMware or request consider some following.

Difference software for PSAPRO between with Lexia, PP2000, Diagbox:

Lexia and PP2000 are the old diagnostic systems for Citroen and Peugeot, now the maintance/update for both of them has been stopped.

DIAGBOX diagnosis system is Citroen and Peugeot universal of next-generation diagnosis program, it contains Diagbox, PPS, and LEXIA three sets diagnosis program, basically covers all Peugeot and Citroen models, it supports new models and new features while the old diagnostic systems Lexia and PP2000 do not.

A few old models can not be supported by Diagbox but Lexia or PP2000 will, if you meet the case that your car can not be found in the Diagbox system, please install the Lexia or PP2000 program for diagnostics.

New PSAPRO Specifications:

Operating temperature: 0 to 60ºC(32 to 140ºF)

Storage temperature: -20 to 70ºC(-4 to 158ºF)

External Power: 8 to 18 V provided via vehicle

Dimensions: 200*100*38MM(L*W*H)

Storage temperature: -20 to 70ºC(-4 to 158ºF)

PSAPRO Main Unit Dimensions : 113*47*25MM

Pure Box with Shaped Sponges : 155*130*63MM

New PSAPRO Packing List:

1 * PSAPRO Main Kit

1 * Long 280CM USB Cable

2 * DVD with All Softwares and Installation Guide

1 * Retails Box

Notes:

1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2.Please allow slight manual measurement deviation for the data.