Leak Tester Hot Sales bottle water Leak Tester Leak Test Equipment ASTM D3078
It is applicable in testing the leak capability of soft packaging, semi-rigid package, rigid packaging in food, beverage, pharmacy, etc industry. Through the test, it can well observe and evaluate the bottle cap or closed container’s seal craft and sealing property, provide scientific date for relative technical research.
Standard:
GB/T14803: Packaging volume aluminum caps of pilfer proof
GB/T17876: Packaging volume-Plastic pilfer proof closure
BB/T0025: 30/25mm plastic guard against theft bottle cap
GB17590: Easy open three cans
GB 10440-89: Cylindrical composite cans
ASTM D 3078 Standard Test Method for Determination of Leaks in Flexible Packaging
Working principle:
To vacuum the vacuum room and make the pressure difference between inside and outside of the specimen in the water. We can evaluate the seal capability by observing the air permeability situation of the specimen. It also greatly improves the accuracy of the seal test.
Feature:
1. The shell is made of high quality stainless steel
2. Air seals, indicating control meter, timing controller, imported components.
3. Sealing plastic column PET cap clamps.
4. Without pressure compensation that can be maintained for a long time set the measured value.
5. Drainage pipe: Φ 8mm imported high-quality polyester TPU tube
Technical parameters:
Test Range |
0--200KPa ( 0.2MPa Or 2Kgf) (0.2MPa(2Kgf)—1.20Mpa accept OEM) |
Pressure resolution |
0.01MPa |
Time accuracy |
<0.01% |
Test chamber size |
200*200mm, 300*350mm, 400*400mm accept OEM |
Air pressure range |
86~106kPa |
Air source |
0.15 ~ 1.5 Mpa (air source pressure should larger than test pressure) |
Environment temperature |
5~40℃ |
Relative humidity |
≤80% |
Power |
220V, 50HZ or 60HZ(grounding wire required) |
Weight |
25 kg. |