Lavina Diamond Tools Bush Hammer Plate Roller Disc For Concrete Stone Granite Floor Grinding And Polishing

LAVINA bush hammer tools create a bush-hammered profile on concrete, a very rough and anti-slip surface, ideal for exterior applications. They also work great for removal of tough coatings when prepping the floor for epoxy application.

These agressive concrete texturing tools can be used with LAVINA machines as well as other grinders on the market that use a QuickChange adapter plate. Typically, you should use bush hammers with no more than 700 rpms.

Each bush hammer roller is attached to our standard QuickChange trapezoid pad that easily slides in and out the tool holder plate, with no bolting required. Make sure you always use the security plates for safe operation with LAVINA grinders! 

1. To create anti-slip surfaces.
2. To remove old glue and resin coatings, in particular thick resins.
3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface.
4. For floor preparation before laying new coatings.
5. To expose the aggregate in concrete floors to prepare for concrete polishing.

Remarks:We also can fit the roller on the other plates such as Lavina Traps,etc