Specifications Of Laser Diode 420nm 395nm 385nm 380nm 375nm 370nm Epileds Chip 1W 3W 9W 10W High Power UV LED 365nm
Product Features
Superior Quality Raw Material; Red copper base + Pure gold wire 99.99%
Branded Chips Bridgelux & Epistar
Extremely Low Light Decay & High Luminous Efficacy 180LM/W
High CRI 80 90 95 98 Available
CCT 1800-2200K; 2600-7000K; 7000-9000K; 9000-15000K 25000-25000K
Aluminum Star PCB Available
LM-80 tested; RoHS;
1W Blue High Power LED | |||||
Power | 1W | Viewing Angle | 120° | ||
Forward Voltage | 3.0-3.6V | Storage Temperature | 0~+60℃ | ||
Forward Current | 350mA | Operating Temperature | -40℃~60℃ | ||
Luminous Flux | N/A | Junction Temperature | 115℃ | ||
Wavelength | 360-370nm | Thermal Resistance | 12℃/W | ||
Emitting Color | N/A | COB Availability | Yes | ||
Variations Available Of Laser Diode 420nm 395nm 385nm 380nm 375nm 370nm Epileds Chip 1W 3W 9W 10W High Power UV LED 365nm |
Power | 1W; 3W; 5W | ||||
Wavelength | 360-370nm; 370-380nm; 380-390nm; 390-400nm; 400-410nm; 410-420nm; | ||||
440-450nm; 460-470nm; 500-510nm; 515-525nm; | |||||
585-595nm; 600-610nm; 620-630nm; 640-660nm; 740-745nm; 850nm. |
Product Dimension Of Laser Diode 420nm 395nm 385nm 380nm 375nm 370nm Epileds Chip 1W 3W 9W 10W High Power UV LED 365nm
Notes :
*All dimensions are in millimeters.(tolerance:±0.2mm)
*The appearance and specifications of the product may be changed for improvement without notice.
GETIAN has very strict raw material selection and verification process. All high stability raw materials applied and various tests have been done on the performance. We have a very wide range of color leds from 360nm to 850nm.
Our Main Products
Focus on High Efficiency Compact LED Packaging Since 2005
COMPANY INTROUDCTION
FACTORY TOUR
WHY GETIAN LEDS?
GETIAN High Power LED Material Introduction & Comparison
Chip | Getian/ Reliable Products | Bridgelux /Epistar | Getian has got certificate of Authorization from Bridgelux and Epistar. Build strategic partnership with Bridgelux. High reliability. |
Others/Poor Quality Products | Other brand/ fake Bridgelux & Epistar | Fake chips cost much less. A huge price gap.The actual power is much lower than claimed.(eg:100w usually 70w actual.)Shorter life span with great light decay. | |
Notes | Fake chips lack reliability. Be cautious especially when using outdoor. Hard and costly to maintain. | ||
Phosphor/ Silica gel | Getian/ Reliable Products | Intermatix/ patented recipe and improved technique. Find a best combination of the ratio between phosphor and silica gel. | When temperature goes high, phosphor can resist it and keep the CCT value stable and even from different angle. |
Others/Poor Quality Products | Intermatix/ others (recipe unknown) | Color temperature will drift when temp. goes high. CCT not even distributed from every angle. | |
Notes | Our phosphor recipe has been successfully applied for 10 years. | ||
Gold Wire | Getian/ Reliable Products | 1.2mil 1W / 1.5mil COB / Purity 99.99% | High purity gold wire has better ductility. Resist high current shock. |
Others/Poor Quality Products | 1.0mil 1W/ 1.2mil COB / Al alloy | Easy to break, more likely lead to led failure. | |
Notes | About 80% led failure comes from the break of the gold wire. | ||
BBOS Technique | Getian/ Reliable Products | Gold wire double attach method and small arc, soldering ball | BBOS technique increases reliablity and decreases the risk of the break of gold wire. |
Others/Poor Quality Products | One time soldering | Higher risk of the break of gold wire. | |
Notes | No extra soldering ball or small arc added will cause potential risk of wire soldering point falling off. | ||
Copper Base/ Soldering Pins | Getian/ Reliable Products | Red Copper/ Copper covered with silver/ PPA (white part) | High heat conductivty. Red Copper: 400W/mK |
Others/Poor Quality Products | Yellow Copper (brass) / Aluminum, Steel | Low heat conductivity. Yellow Copper: 100W/mK. Aluminum: 205W/mK. Steel is easy to corrode. | |
Notes | The heat conductivity of red copper is nearly 4 times higher than brass. PPA material has good high temperature resistance | ||
Color Separation | Getian/ Reliable Products | 2 times | Guarantee good color unity. Normal range within + -250K |
Others/Poor Quality Products | mostly 1 time | Wider range or not so consistent. | |
Notes | Phosphor Spraying (first time check); Binning (Second time check.) | ||
Reliability/ Warranty | Getian/ Reliable Products | 4 years warranty | Real Life test report, RoHS, SGS,LM-80 Certification |
Others/Poor Quality Products | Unknown | / | |
Developing Ability | Getian | Brand-New flip chip led released. Max power up to 300W. Lighting area 1.4mm². High luminous intensity: 50LM/mm² | Strong developing team. Improve current production line. And release new and high-end products regularly. |
Others Company | Unknown | / | |
Notes | First one in China. (Especially for stage light, projector and track light) More details... |
Other Advantages
More details for led products,pls contact Setina Wang, Skype: setina.wang
She will try her best to support you.