Large load cast iron take up bearing housing t206

The spherical outside surface ball bearing is a bearing based on the 62 and 63 series deep groove ball bearing, generally with double-sided sealing structure.

Features:

Large load capacity.

Good sealing quality.

Self aligning, esay to install and repair.

High impact fatigue strength.

High rotational accuracy.

Good lubrication,multiple oiling methods for easy operation.

Application:

Applicable to fixed or changing rotation direction.

Relatively high rotation speed stable operation.

The ones secured by the interference-fit method can also be used in application with high rotation speed and changing direction.

• More Pictures of Take Up Bearing Housing for Your Further Reference

• The Detailed Dimension of UCT200 Series Take Up Bearing Housing

• The Tolerances for Take Up Bearing Housing

• The The Limiting Rotational Speed(RPM)
  

    The limiting rotational speed of the mounted ball bearing untis mainly depends on the fitting between the shaft and the bearing. It is recommended that, under normal operating conditions, the fitting between the bearing and the shaft be H7. And the relevant RPM details are shown on the below table. Loose fitting is suitable for lighter load products which allow lower limiting rotational speed. On the contrary, Heavy load products which require higher limiting rotational speed should choose tight fittting named J7 fitting.

• The Mounting Method of Take-up Ball Bearings Units

    The correct installation order is: first install the housing, then the shaft and the bearing.In principle, the bearing units can be easily installed at any place. However, in order to have a long service life,the mounting base should be flat and rigid.
    The Take-up units are mounted on two parallel slides, bearing centers to be adjusted by adjustable bolts. The relevant parts dimensions are shown as below:

• Foundry Casting Workshop Pictures