Large current 12v 500a 6000w switching electrolysis variable power supply
Large current 500A 12v 6000w switching electrolysis variable power supply
500a 12v dc power supply
FEATURES
(1) Small size and light weight are suitable for work surface use and rack installation.
(2) Using PWM modulation, the consumes power of crystal module is low, high efficiency, and more power.Well-designed electronic technology circuit, forced air cooling and heat treatment, with a very low temperature coefficient.
(3) Low noise and low ripple.
(4) Using high gain amplifier circuit design, with good fast response characteristics.
(5) Using a 4-bit high sampling rate, high-resolution voltage, current digital display meter.
(6) Built-in O.V.P over-voltage protection circuit and O.T.P over-temperature protection circuit, the protection function is perfect and reliable.
(7) This product is designed with load terminal voltage detection terminal, which has the function of accurately reading the voltage of the load terminal and performing precise control.
(8) Voltage remote compensation connector (COLRAGE SENSING), compensates for line voltage drop and improves test accuracy.
TECHNICAL PARAMETRIC
|
Brand |
IDEALPLUSING |
|
Model |
IPS-ATD12500 |
|
AC Input |
Single phases 220VAC |
|
Input Voltage Range |
220VAC±10% |
|
Input frequency |
50Hz/60Hz |
|
Output voltage |
12VDC |
|
Output current |
500A |
|
Output Power |
6000W |
|
Voltage Stabilization |
≤0.3%+10mV |
|
Load Stabilization |
≤0.5%+30mV |
|
Ripples and Noises |
≤0.5%+10mVrms |
|
Voltage Display Accuracy |
4-digit Accuracy: ±1%+1 word (10%-100% rating) |
|
Display Format |
0.000V-9.999V; 0.00V-99.99V; 0.0V-999.9V |
|
Current Display Accuracy |
4-digit Accuracy: ±1%+1 word (10%-100% rating) |
|
Remote Adjustment |
(Analog control: Voltage adjustable ):0-5VDC;(Current adjustable):0-5VDC |
|
Remote Display |
(Analog control: Voltage adjustable ): 0-5VDC;(Current adjustable):0-5VDC |
|
Output Over Voltage Protection |
Built-in O.V.P. protection, protection limited value is rated +5% |
|
Output Over Load Protection |
Overload, current limit, constant current output |
|
Over Temperature Protection |
Built-in O.T.P. protection, Protection value 85℃±5% heat sink temperature |
|
Voltage Setting |
10-turn precision potentiometer |
|
Current Setting |
10-turn precision potentiometer |
|
Output Polarity |
Output Positive(+) negative(- ) Can be grounded at will |
|
Heat Dissipation Way |
Forced fan cooling |
|
Work Conditions |
Indoor use design,Temperature:0℃~40℃; Humidity: 10%~85%RH |
|
Storage Conditions |
Temperature:-20℃~70℃;Humidity: 10%~90%RH |
|
Packaging Dimension |
L470*W430*H180(MM) |
|
Gross Weight |
23KG |
| Model /IPS-ATD | Dimension /MM | AC INPUT /VAC | DC Output/Volts VDC | Output Amps/AMP | Output Power/WATT |
| IPS-ATD10300 | 430*350*88 | 1PH 220VAC±15% | 10VDC | 300A | 3000W |
| IPS-ATD30100 | 430*350*88 | 1PH 220VAC±15% | 30VDC | 100A | 3000W |
| IPS-ATD4075 | 430*350*88 | 1PH 220VAC±15% | 40VDC | 75A | 3000W |
| IPS-ATD5060 | 430*350*88 | 1PH 220VAC±15% | 50VDC | 60A | 3000W |
| IPS-ATD6050 | 430*350*88 | 1PH 220VAC±15% | 60VDC | 50A | 3000W |
| IPS-ATD7540 | 430*350*88 | 1PH 220VAC±15% | 75VDC | 40A | 3000W |
| IPS-ATD10030 | 430*350*88 | 1PH 220VAC±15% | 100VDC | 30A | 3000W |
| IPS-ATD15020 | 430*350*88 | 1PH 220VAC±15% | 150VDC | 20A | 3000W |
| IPS-ATD12512 | 430*350*88 | 1PH 220VAC±15% | 250VDC | 12A | 3000W |
| IPS-ATD30010 | 430*350*88 | 1PH 220VAC±15% | 300VDC | 10A | 3000W |
| IPS-ATD5006 | 430*350*88 | 1PH 220VAC±15% | 500VDC | 6A | 3000W |
| IPS-ATD6005 | 430*350*88 | 1PH 220VAC±15% | 600VDC | 5A | 3000W |
| IPS-ATD10003 | 430*376*88 | 1PH 220VAC±15% | 1000VDC | 2A | 2000W |
|
Model |
Dimension |
AC INPUT |
DC Output |
Output Amps |
Output Power |
|
430*370*264 |
3PH 380VAC±15% |
10VDC |
500A |
5000W |
|
|
IPS-ATD40125 |
430*370*264 |
3PH 380VAC±15% |
40VDC |
125A |
5000W |
|
430*370*176 |
3PH 380VAC±15% |
100VDC |
50A |
5000W |
|
|
430*370*176 |
3PH 380VAC±15% |
500VDC |
10A |
5000W |
|
|
430*370*176 |
3PH 380VAC±15% |
1000VDC |
5A |
5000W |
Q1. Can I have a sample order?
A: Yes, sample order is acceptable to test and check quality for the first cooperation
Q2. What about the lead time?
A: Most of the model in the stock, sample lead time after receive payment 1-3 working days
Q3. Do you have any MOQ limit?
A: Low MOQ, 5 pieces for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx, or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. How to proceed with an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirm the samples and places deposit for formal order. Finally, We arrange production.
Q6. Is it acceptable to print the buyer logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: How to deal with the flaw?
A: Our products are produced in a strict quality control system and the percent of pass is often maintained over 99.8%.
Q8: Do you offer a guarantee for the products?
A: Yes, we offer a 1-year warranty for all power supply.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier