Introduction |
Prestressed concrete electric utility spun pole production machines mainly include centrifugal spinning concrete utility pole machine and customized concrete pole molds .
Centrifugal spinning machine for concrete electric poles and concrete pole steel mould for prestressed spun concrete electrical pole are two main equipments, which are used for producing psc and rcc concrete poles and other cement products with a variety of different diameter and length.
Centrifugal spinning machine for psc spun concrete pole is driven by remote-controlled continuously variable motor . With Its big power, during operation spinning machine runs smoothly and has a variable-speed range. So the production of prestressed concrete pole are good quality with high srengtht.
There are two kinds of centrifuge concrete pole machine at present from structure . The base of the machine is welded in box-type structure, sturdiness and durability. The bearings are well sealed and reliable, long service. Random electric control equipment is complete and easy to operate.
Prestressed Concrete Spun Pole Mould is used for psc concrete electrical pole production. There are many kinds of concrete poles from shape. But most widely used in the world is rectange or square concrete poles and round concrete poles . So we design rectange or square pole mould and circular / round concrete pole steel mould accordingly .
Its mainly manufacture technology is longitudinal tension by steel wires. During rotation of mould, it can squeeze out the excess water contained in concrete under centrifugal force. Thus, it can greatly improve the concrete density and strength.
Main parameters |
Inside diameter (mm) |
Cotter diameter (mm) |
Wheel base (mm) |
Wheel diameter (mm) |
Length(mm) |
300 |
150 |
2000 |
600 |
7000-10000 |
350 |
170 |
2000 |
600 |
7000-15000 |
400 |
190 |
2000 |
630 |
6000-18000 |
450 |
230 |
2000 |
680 |
6000-9000 |
500 |
310 |
2000 |
700 |
6000-9000 |
550 |
350 |
2000 |
750 |
6000-15000 |
600 |
470 |
2000 |
800 |
6000-9000 |
Features |
1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).
2. Crack resistance can increase about 3~5 times.
3. Rigidity increases 1~3 times.
4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).
5. Good durability, can delay the existence and expansion of cracks.
6, Protect the environment on which human beings depend on for existence, and reduce the deforestation.
Service |
Pre-sale (1) Professional suggestions (raw material matching, machine selection, plan The condition of build factory, feasibility analysis for brick machine production line) (2) Device model choice (recommend the best machine according to the raw material, capacity and the size of brick) (3) Welcome to visit our factory and production line anytime Sale: (1) Update the production scheduling in time (2) Quality supervision (3) Product acceptance (4) Shipping on time After-sale: (1) The engineer will guide to carry out the plant at the clients side. (2) Set up, fix,and operate (3) Will not stop training the operator until they are satisfied at clients side. (4) 24 hours service (5) Recall clients regularly ,get feedback in time,keep well communication with each other. |
FAQ |
1.Question:Does the machine could change mold? Answer:Yes,this machine could change different kinds of mold.The machine could produce interlock, paver size depending on your local requirements.
|
Welcome To Contact Us |
Contact:Vicky Lin
Skype:vickylin329 Wechat:18653975262
email:sales1 at sdshiyue.com Mobile/Viber/whatsapp:0086-18653975262
|