LRS-150-24 150W 24V Single Output Constant Voltage Meanwell LED 110V DC Power Supply
LRS-150 series is a 150W single-output enclosed type power supply with 30mm of low profile design.
Adopting the input of 115VAC or 230VAC(selectable by switch), the entire series provides an output voltage
line of 12V, 15V, 24V, 36V and 48V.
In addition to the high efficiency up to 90%, the design of metallic mesh case enhances the heat dissipation
of LRS-150 that the whole series operates from -30°C through 70°C under air convection without a fan. Delivering an extremely low no load power consumption (less than 0.5W), it allows the end system to easily meet the worldwide energy requirement. LRS-150 has the complete protection functions and 5G anti-vibration capability; it is complied with the international safety regulations such as TUV EN60950-1,EN60335-1,EN61558-1/-2-16, UL60950-1 and GB4943. LRS-150 series serves as a h i g h price-to-performance power supply solution for various industrial applications.
MODEL |
LRS-150-24 | |
OUTPUT
|
DC VOLTAGE |
24V |
RATED CURRENT | 6.5A | |
CURRENT RANGE |
0-6.5A |
|
RATED POWER |
156W |
|
RIPPLE&NOISE(max.) Note.2 |
200mVp-p |
|
VOLTAGE ADJ. RANGE |
21.6-28.8V |
|
VOLTAGE TOLERANCE Note.3 |
±1.0% |
|
LINE REGULATION |
±0.5% |
|
LOAD REGULATION |
±0.5% |
|
SETUP, RISE TIME |
500ms, 30ms/230VAC 500ms,30ms/115VAC at full load |
|
HOLD UP TIME (Typ.) |
40ms/230VAC 35ms/115VAC at full load |
|
INPUT
|
VOLTAGE RANGE Note.5 |
85 ~ 132VAC / 170 ~ 264VAC by switch 240 ~ 370VDC(switch on 230VAC) |
FREQUENCY RANGE |
47~63Hz |
|
EFFICIENCY (Typ.) |
89% |
|
AC CURRENT (Typ.) |
3A/115VAC 1.7A/230VAC |
|
INRUSH CURRENT (typ.) |
COLD STAR 60A/230VAC |
|
LEAKAGE CURRENT | <0.75mA/240VAC | |
PROTECTION
|
OVER LOAD |
110 ~ 140% rated output power |
Protection type : Hiccup mode, recovers automatically after fault condition is removed |
||
OVER VOLTAGE |
28.8-33.6V |
|
Shut down output voltage, re-power on to recover |
||
OVER TEMPERATURE |
Shut down output voltage, re-power on to recover
|
|
ENVIRONMENT
|
WORKING TEMP. |
-30 ~ +70°C |
WORKING HUMIDITY |
20~95% RH non-condensing |
|
STORAGE TEMP., HUMIDITY |
-40~+80°C, 10~95% RH |
|
TEMP. COEFFICIENT |
±0.03%/°C(0~50)°C |
|
VIBRATION |
10~500Hz, 5G 12min./1 cycle, period for 60min. each along X,Y,Z axes |
|
OVER VOLTAGE CATEGORY |
II; Compliance to EN61558, EN50178, EN60664-1, EN62477-1; altitude up to 2000 meters |
|
SAFETY& EMC |
SAFETY STANDARDS |
UL60950-1, TUV EN60950-1, EN60335-1, EN61558-1 2 16 .1, CCC GB4943, BSMI CNS14336-1, EAC TP TC 004, AS/NZS 60950.1(by CB) approved |
WITHSTAND VOLTAGE |
I/P-O/P:4kVAC I/P-FG:2kVAC O/P-F/G:1.25kVAC |
|
ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-F/G: 100M Ohms / 500VDC / 25°C / 70%RH |
|
EMC EMISSION |
Compliance to EN55032 (CISPR32) Class B, EN55014, EN61000-3-2,-3, GB/T 9254, BSMI CNS13438, EAC TP TC 020 | |
EMS IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), heavy industry level, criteria A, EAC TP TC 020 | |
OTHERS |
MTBF |
601K hrs min. MIL-HDBK-217F(25°C) |
DIMENSION |
159x97x30mm(L*W*H) |
|
PACKING |
0.48Kg; 30pcs/15.4Kg/0.75CUFT |
|
NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by usin g a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. 7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” 8. The ambient temperature derating of 5 /1000m is needed for operating altitude greater than 2000m (6500ft) |
1.Q:Can I have a sample order firstly ? what's your MOQ limit?
A: Yes, sample order is acceptable. And we do not have MOQ limi.
2.Q:What's about the lead time and shippment?
A: For common type like APV LPV HLG ELG LRS DR MDR series, we have enough stock. Sample Order can be delivered within 2 days, Bulk Order can be delivered within 2~7 days after payment, not common type need 10~35 days after payment, for detail lead time, please contact our sales.
For shipping, we often use DHL, FedEx, UPS, and TNT. And they take 3-5 days to arrive. For bulk order, we recommend to send goods by Air or by Sea to save your transportation cost.
3.Q:How does your factory do regarding quality control?
A: Quality is priority.We always attach great importance to quality controlling for to the very end.Our factory has gained UL,ENEC,PSE,CCC,CB,CE,ErP,SAA etc authentication.
1. What we sell is 100% Genuine Mean Well Power Supply.
2. We are distributors and manufacturers in China.
3.Alibaba assessed 7 years Gold Supplier and 18 years of industry experience.
4.Inspected by the inspection Institution of Bureau Veritas Certification.
5.Price is negotiable if you have large quantity demand
6.100% QC inspection Before Shipping.
7.Best Quality & Best Service with Competitive price.
8.Shipping will be the most economical for you and freight cost is informed in advance for your consideration.decision for the shipping terms will be made according to your requirements.
Faster Response/Delivery:
17 hours customer service available from Monday to Saturday, 1-3 days complete sourcing requirements, finish OEM/ODM projects evaluation in one week. Orders/Sample sent by courier, such as UPS and FedEx, arrive at your doorstep within an average of 5 days, 1-3 weeks finish sea shipment, Shipments are insured for successful delivery and trackable online.
Professional aftersale service:
1. All of our products have 12months warranty.
2. Track the order until you get the goods.
3.All our products are inspected strictly by our QC department before delivery
4. Sample order within 1-3 working days , bulk order within 3-6 working days .
We accept different payment method:
T/T(30% before production, 100% when delivery),D/P,D/A, Western union, L/C, paypal,Escrow,Moneygram
One-stop Mix-products sourcing:
save more freight, and small order or sample order accepted too.
Send your Inquiry Details in the Below,Click "Send" Now!