LM- DP8S portable laser speaker light With blue tooth can connect with microphone and computer

Products Introduction :  

 LM- DP8 portable Bluetooth  laser light speaker  is a Multifunctional electronic product

integrating laser stage light and blue-tooth speaker.

Dazzling stage lighting effect can be beat with music rhythm.Suitable for parties, camping,

group activities to create atmosphere.The built-in battery is convenient to carry, powerful,

widely applicable and very playable.

Product Parameter:

Product specification: 90*90*90MM

Product material: advanced aviation aluminum +ABS

Audio output: dual channel stereo

Light control: sound control/self-walk/flicker

Projection Angle :>, 120

Connection: wireless bluetooth /DC/TF card/bluetooth call support;

Input voltage: 5V/1A

-Battery capacity: 3000MAH

40db--Sound-controlled induced decibel value: >40db

 Laser power: sharp red light 650nm 100mw   

Sharp green light 515nm 50mw

Osram blue light 450nm 80mw

Full power usage time: 3 hours (depending on different playing volume);

Product instructions -

This device includes blue-tooth connection/double speaker double channel music

play/music play control/answer the phone/double marks voice control/dazzling stage light

 (with voice control)/ large capacity battery/rich external interface/non-skid pad + bracket

fixation; 0as illustrated);

2: power switch;Press the power switch, and the speaker prompts blue-tooth to turn on.

External blue-tooth device can be used for connection.Press down again to turn off the

power.This master switch controls the power on and off of the equipment.

-Bluetooth name of the device :DP8

Play/pause switch (short press); When other devices are connected to the device

successfully, this button can be used to switch between play/pause without other devices

to operate.Long press this button, the playback sound source will be switched in the input

of blue tooth /TF card/audio interface.When the phone connected to the device has a call

coming in, press this button to answer the phone.

4:Last song/next song;

Short press to find the last/next song for cutting, + for the next song, - for the last song;

Long press to adjust the volume, + to increase the volume, - to decrease the volume

 When the volume is increased, the beeping sound is the maximum volume.

5:Light mode switch

1. Default light off;

2. Press enter mode 1; The light is switched on by itself, and the sound control is

turned on. The light can flicker with the rhythm of music.

3. Press enter mode 2; Light switch by itself, sound control off.

4. Press enter mode 3; The light switches by itself and flickers freely with the sound

control off.

6. Charge the device;

The device is equipped with a high-capacity polymer battery. It USES a 5V/1A charging

head commonly used in mobile phones and can be charged by inserting a Micro USB

charging port. Red light is charging state, blue light is full.

additional information

The service time of the built-in polymerization battery of this device depends on the

service environment. When the device is at the highest volume for a long time, the power

amplifier is always in a high-power operation state, and the playing time will be shortened.

At this time, the device can continue to use the medium volume after automatic restart.

Note: please do not use the device when charging.