LED Power Supply 36W 12V DC 3A Constant Voltage for LED Strip Lights and G4 MR11 MR16 LED Light Bulbs
LED Power Supply 36W 12V DC 3A Constant Voltage for LED Strip Lights and G4 MR11 MR16 LED Light Bulbs
Products descriptions
| Model | VUO-036-012N4 | ||||
| Output | DC voltage | 12V | |||
| Rated current | 3A | ||||
| Current range | 0-1.25A | ||||
| rated power | 36W | ||||
| Ripple & Noise (peak to peak) | <300mV | ||||
| No-load voltage | ±0.5V | ||||
| Input | voltage range | 100~265V | |||
| Current | 47~63Hz | ||||
| Power factor | NO PFC | ||||
| effectiveness(Typ.) | 0.85 | ||||
| Alternating current(Typ.) | 0.18A/220VAC | ||||
| Protection | Short circuit | Protection mode: hiccup mode, abnormal conditions can be automatically restored after removal | |||
| overload | 100-160% | ||||
| environment | Operating temperature | -10~+40℃ (Please refer to the load reduction curve) | |||
| Storage temperature | -40~+80℃ | ||||
| Safety&EMC | Safety standards | Suitable for EN61347-1;EN61347-2-13;SELV;IP67 | |||
| Pressure | Input - Output: 3.75KVAC Input - Enclosure, Ground: 2KVAC Output - Enclosure, Ground: 0.5KVAC | ||||
| Tips | 1.If without specia explanation, all specifications are measured at an input of 220VAC, rated load, ambient temperature of 25 ° C . 2.Ripple & Noise Measurement Method: Use a 12 '' twisted pair, and the terminals are connected in parallel with 0.1uF and 47uF capacitors and tested at 20MHz bandwidth. | ||||
Product description
Made especially for powering LED lights, this high-quality power supply will convert household AC current to 12V DC. Perfect for any LED installation that draws up to 3A of current, including LED light strips, G4 LED bulbs, MR11 LED bulbs, MR16 LED bulbs, or your own custom-built project with multiple LEDs wired in series.
Electrical connections are easy and safe with this power supply. Input and output are clearly marked, and the terminals are fully covered and insulated by the orange end-caps for safety. The terminals are screw-clamp type: Just strip off 3/16" of insulation from each wire, insert the wire into the appropriate terminal hole and tighten down the screw. No soldering, wire nuts, or exposed connectors. The power supply has built-in thermal overload and short circuit protection for added safety.
features:
- Input Voltage: AC100-240V / 50-60HzV
- Output: DC12V 3A ,Constant Voltage
- Power: 36W.
- Brand: Hualing
- Shell material: Hard plastic.
- Dimensions: 4.5" x 1.8" x 1" (115mm x 45mm x 27mm)
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier