2. Can I run my GDCREESTAR light with a 14 volt A/C signal?
No. The lights were designed for DC voltage. Lights operated at 14 volt NC may not be damaged, but could ficker or
appear dim.
3. Can I run my GDCREESTAR light in an A/C wall outlet?
No! LightDream lights are designed for DC voltage. Connection to an AIC wall outlet will very likely permanently
damage the light.
4.1 sce the power in the catalog, why The indicated power is dfferent from the real power?
The indicated power is the max power of the Chips. We limit the power to 70% to 90% of the chips so that the longer
life timne and better light flcts can be achieved.
5. I conected my light to my car and it docsn't work. Now what?
Several items could be preventing the lights from properly working The below items can help in toublshooting.
Try conecting the wires of the lights directy to a fully charged car battery. If the light works then there is a problem
between the battery connection and the light. Potential problems include a faulty switch, faulty relay, insuficicnt thickness
wire, and improper grounding.
6. When I cnnect my light dreely to my bttery, it is at full brghness, but when I use a long cable to istall it, the light is dim. What is wrong?
You need to make sure you are using an appropriately sized gauge wire for your ntatlation. This is especially important
if using a long wire from the battry to the light intallation. If the wire gauge is too small, there will be significant voltage dropped acro8s the wire, preventing the light from powering up flly.