Product Description
LDG series intelligent electromagnetic flowmeter is manufactured according to the law of electromagnetic induction to measure the volume flow of conductive liquid in pipelines, such as water, sewage, mud, slurry, acid, alkali, salt liquid and food slurry.It is widely used in petrochemical, mining, metallurgy, coal, water conservancy, water supply and drainage, sewage treatment and other industries.
Main technical parameters
Flow measurement range and range ratio |
Display range ratio 1:150, precision range ratio Leve0.3 1:4, Leve0.5 1:10, Leve1.0 1:20 |
Velocity range |
0.3~15m/s |
Dielectric conductivity |
≥5μs/cm |
Accuracy of measurement |
Level 0.3, 0.5, 1.0 |
Medium temperature |
-20℃~60℃,-20℃~90℃,-20℃~100℃,-20℃~180℃ |
pressure |
1.6,2.5,6.4,16,26,42Mpa |
Using the environment |
The temperature -20℃~+50℃ Humidity≤85%,Air pressure 86kpa~106kpa |
The output signal |
Frequency output 0-5KHz Voltage output 1-5v Current output 4 ~ 20mA,Rs-485 serial interface or RS232 interface,Mudbus agreement Hart protocol |
Power off data storage time |
Ten years |
The power supply |
1. external power supply 220VAC±15%;2. external power supply 24VDC±5%(optional)3.Lithium battery power supply |
Power consumption |
≤15w(external power supply) |
Protection grade |
IP67,IP68(Only for fractals) |
The lining material |
Polyurethane rubber, neoprene, ptfe, F46, etc |
Electrode materials |
316L, hastelloy HB, hastelloy HC, titanium, platinum, etc |
Special electrode material |
Such as: titanium, tantalum, platinum and other rare metal materials |
The installation type |
The whole body,Separate body(Wall hung) |
Explosion-proof grade |
ExmdibIIBT4 |
Material drawing
* flange dimensions can be customized according to user requirements and relevant standards.
Working Area
Manufacturing Shop
Installation environment
1:How long will you give me the reply?
we will contact you in 2 hours as soon as we can.
2:Could I get samples?
Yes,we have materials in stock to help you to get the samples as soon as we can.
3:How about the quality of the managements?
We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before shipping to you .
4:Could you provide me the shortest lead time?
We have materials in our stock,if you really need,you can tell us and we will try our best to satisfy you.
5:Could I visit your factory?
Of course,if you need we will help you to visit our factory.
6:If I have paid,when will you help me to produce?
When we have received the money in our account,we will give you the receipt and arrange to produce immediately
7:How to pay for that ?
Of We could accept T/T,Paypal,WU ,Credit Assurance.
You will get full protection for your orders ,More details Kindly click Trade Assurance .