*Attention:
*Prevent wrong positive and negative protection, wrong connection will not burn out
*With 300 mm wires
*Lead-acid batteries & lithium/Lifepo4 batteries all can use
*We set up the delivery, hand direct use, can also set their own
Accurately display the battery power percentage and voltage, intuitively grasp the battery use state
*With its own switch, it can turn off the power, no power consumption after it is turned off
Double button design, simple and efficient Settings, only a few seconds can be set up
*Setting key post-setting: Avoid arbitrary setting by terminal customers and reduce after-sales service
*Date details:
Model Name : 6D-General model
Display: LCD liquid crystal display
Operating current: < 5mA
Sleep current: 12uA (12V test)
Product size: 61.3*33.3*13.5mm
Opening hole size: 58.3*28.5mm
We have 3 model indicator
1. 3.7V indicator(Only can use for 3.7V battery of 1S Pack, others can't use)
2. 5V-73V indicator (Only can use for 5V-73V Pack, can't use for lifepo4)
3. 8V-120V indicator (Can use for lithum / lifepo4 / lead-acid battery pack)
If you want 1S Pack of 3.7V (1 Series pack) or 2S Pack , please contact with seller.
*Setting steps
1. Disconnect the power of the power display board, hold down the setting button, release the setting button after the power is switched on, and the display screen shows the current setting parameters of the power;
2. Press the setting key to select the battery specification P/L/F(P=12V lead-acid, L=3.7V lithium battery, F=3.2V lifepo4 battery);
3. Press the function key to set the number of battery series. Press the function key and the setting key to select the number of battery series up or down;
4. Long press the function key to enter the advanced Settings interface, use the Settings key to select S1-S5, and confirm the mode of selecting or deselecting;
5. Power on after setting, the setting data will be saved automatically.
Example: 10 series of lithium battery power, turn on power percentage voltage automatic rotation display (S1 mode)
Operation: Disconnect the power display module, hold down the setting key to connect the power supply module, press the setting key to select L, press the function key to select 10, and long press the function key to select S1, and then power on again.
Setting way of go to the Set interface
*Press and hold the Settings button on the back, do not power on first: first press and hold the Settings button, and then power on, then will enter the Settings interface, this efficiency is the highest.
*There is also a newly produced indicator, which also has hidden Settings on the front (it can also be set after installation or can also be set in the display state) : long press the front function key, more than five seconds, it can also enter the Settings interface.
*Matters needing attention
1. The LCD screen of the module is made of glass, which is fragile. Severe falls, heavy loads and impacts should be avoided.
2. The liquid crystal of the module is made of HTN material with wide temperature. The operating environment is -10℃~50℃
When the temperature returns to the normal temperature, the LCD display will automatically recover.
3. The ambient temperature of liquid crystal above 50℃ will shorten the service life of liquid crystal.
*Connection method
Q: How many model of the indicator have?
A:1. 1S Indicator (only for 1S lithium pack)
2. 5V-73V Indicator (only for lithium and lead-acid cell)
3. 8V-120V indicator(Lithium / lifepo4 / lead-acid cell all can use)
Q:How to set up?
A:When delivery will put specification file. Please follow it to do. Also can follow the alibaba product specification to set up.
Q:Can i choose the colour of display?
A :Yes, of course ! Because we have 3 colour of white\Blue\Green. But the default color is green(So, if you want other colour, please tell seller)
Wuxi Porffor Technology CO., LTD. Nearby Shanghai, sunan shuofang airport.The company has more than 110 employees, including 6 professional technical engineers who have been engaged for many years.Now, the company has the most advanced and high-quality automatic patch and high-precision testingequipment, 6 SMT productionlines and 2 DIP production lines. The company operates strictly in accordance withISO9001 international quality system. The purchase of raw materials, production and manufacturing of products, controlof quality, after-sales service and other strict, rigorous,standardized management procedures. Our products have exported to Europe, southeast Asia, Australia, Africa and otherglobal 80 countries.The company in line with the talent first, the pursuit offirst-class, leading change, right management, coexistence and win-win corporatepurposes, Set up a good brand image in the industry, we can provide OEM, ODM and other services. We are willing to cooperate with customers and peers in the industry.
*Warranty times : Min 2 years
*Repaired service : Forever
*Problem Solve : If meet any problem of the products. Firstly, Will ship news of free to you.
Then return back to us, we shall be check the Problem.
We are looking forward to cooperating with you
Packing ddetails:Electrostatic bubble bag packaging, carton packaging
Delivery Time: Shipped within 3-7 working days after payment.