Common number | ASTM | Mechinical Spefication | ||||
Rm Mpa | Y.S.(Mpa) | A5 | ||||
201 | 201 | ≥520 | ≥275 | ≥40 | ||
1Cr17Ni7 | ≥520 | ≥205 | ≥205 | |||
301 | 301 | ≥520 | ≥205 | ≥40 | ||
1Cr18Ni9 | ≥520 | ≥205 | ≥40 | |||
0Cr18Ni9 | ≥520 | ≥205 | ≥40 | |||
304 | 304 | ≥515 | ≥205 | ≥205 | ||
00Cr19Ni10 | ≥480 | ≥175 | ≥40 | |||
304L | 304L | ≥485 | ≥170 | ≥30 | ||
309S | 309S | ≥520 | ≥205 | ≥40 | ||
0Cr25Ni20 | ≥520 | ≥205 | ≥40 | |||
310S | 310S | ≥520 | ≥205 | ≥40 | ||
0Cr17Ni12Mo2 | ≥520 | ≥205 | ≥40 | |||
316 | 316 | ≥515 | ≥205 | ≥30 | ||
00Cr17Ni14Mo2 | ≥480 | ≥175 | ≥40 | |||
316L | 316L | ≥485 | ≥170 | ≥30 | ||
316Ti | 316Ti | ≥515 | ≥205 | ≥30 | ||
0Cr19Ni13Mo3 | ≥520 | ≥205 | ≥40 | |||
00Cr19Ni13Mo3 | ≥480 | ≥177 | ≥40 | |||
317L | 317L | ≥480 | ≥176 | ≥40 | ||
0Cr18Ni10Ti | ≥520 | ≥205 | ≥40 | |||
321 | 321 | ≥515 | ≥205 | ≥30 | ||
409L | ≥360 | ≥175 | ≥25 | |||
410 | 410 | ≥440 | ≥205 | ≥20 | ||
430 | 430 | ≥450 | ≥205 | ≥22 | ||
444 | 444 | ≥480 | ≥310 | ≥30 | ||
410S | ≥420 | ≥290 | ≥33 | |||
2205/S31803/F51 | 2205 | ≥450 | ≥620 | ≥15 | ||
2507/S32750/F53 | 2507 | ≥550 | ≥800 | ≥25 | ||
630 | ≥520 | ≥785 | ≥18 | |||
904L/N08904 | ≥490 | ≥216 | ≥35 |
Item | Surface Finishing | Surface Finishing Methods | ||||
No.1 | HR | Heat treatment after hot rolling, picking, or with treatment | ||||
NO.2D | Without the SPM | Method of heat treatment after cold rolling, picking surface roller with wool or eventually a light rolling a matte surface processing | ||||
NO.2B | After SPM | Giving No.2 processing materials appropriate method of cold light sheen | ||||
BA | Bright annealed | Bright heat treatment after cold rolling, in order to be more shiny, cold light effect | ||||
NO.3 | Shiny, coarse grain processing | The NO.2D or NO.2B processing timber NO.150-180 polishing abrasive grinding belt | ||||
NO.4 | After CPL | The NO.2D or NO.2B processing timber No. 150-180 polishing abrasive grinding belt | ||||
240# | Grinding of fine lines | The NO.2D or NO.2B processing timber 240 polishing abrasive grinding belt | ||||
320# | More than 240 lines of grinding | The NO.2D or NO.2B processing timber 320 polishing abrasive grinding belt | ||||
400# | Close to BA luster | The MO.2B timber 400 polishing wheel polishing method | ||||
HL(hair lines) | Polishing line having a long continuous processing | In a suitable size ( usually mostly No. 150-240 grit ) abrasive tape for as long as the hair, having a continuous processing method of polishing line | ||||
NO.6 | NO.4 processing less than the reflection , the extinction | NO.4 processing material used for polishing Tampico brushing | ||||
NO.7 | Highly accurate reflectance mirror processing | No. 600 of the rotary buff with a polishing | ||||
NO.8 | Highest reflectivity mirror finish | Fine particles of abrasive material in order polishing , mirror polishing with a polishing |