We have many items LED Demo case,can do the case accordingly to your requirement.
Please check below some our normal led case.
Product Instruction
Ø Product Name: LED Test Case
Ø Model: L30W20-12P(P: parameter)
Ø Function: Test & Demo LED lamps
Ø Meter Function: AC,DC,Voltage, Current,
Frequency, Annual Power consumption, etc.
Ø Material: Aluminum alloy, MDF, Acrylic etc.
Ø Case size: L30*W20*H13 (unit :cm)
Functional components:
|
Load sockets : E26/27-B40-E14-G24-GU10-MR16 All sockets can be customized Features: 1. The LED test & demo case with good aluminum plates to protect the cabinet frame, the corner of the carton using stainless steel edge to anti-hit and to be firm extremely. 2. Lamp with one-on-one control switch, safe and convenient. 3. A stored box on the right to put cables, small tools or accessories. 4. A smart case is very easy to carry. 5. Input voltage, current, active power, power factor, Frequency, annual power consumption, DC-power, displaying 6 parameters on the meter green during testing. 6.The parameters are clear to display on the meter green , so saving-energy how clear it is at a glance. |
Detailed configuration
Support lamp |
Lamp Quantity |
Output voltage |
Note |
E26/E27 LAMP-SOCKET |
2 pcs |
AC220V or 110V |
LED lights VS Traditional lamp |
G24 LAMP-SOCKET |
1 pc |
AC220V or 110V |
LED lights VS Traditional lamp |
E14 LAMP-SOCKET |
2 pcs |
AC220V or 110V |
LED lights VS Traditional lamp |
GU10 LAMP-SOCKET(bayonet) |
2 pcs |
AC220V or 110V |
LED lights VS Traditional lamp |
MR16 LAMP-SOCKET |
2 pcs |
DC12V |
LED lights VS Traditional lamp |
AC-Output UNINVERSAL |
1 pc |
AC220V or 110V |
|
4 Port OUTPUT WIRE CLAMP |
2 pcs |
AC220V and DC12V |
AC220V 1PCS , |
TCL/PHILIPS LIGHT MODULATOR |
1 pc |
AC220V or 110V |
|
DIMMABLE SELECT SWITCH |
1 pc |
AC220V |
|
LIGHT MODULATOR |
1 pc |
AC220V |
|
Specification:
Recognized lamp holder: all socket interface has a corresponding-marked name for the user to distinguish and identify; All sockets have one-on-one control switch, convenient control and test.
The case internal circuit: strictly distinguish for AC and DC; AC socket (- AC) interface can test the electric parameters are as follows: voltage, current, power, power factor, annual power consumption (10 hours /per day ) and frequency;
DC (- DC) part of the parameter display: DC lamp holder (- DC) interface data displayed in the DC POWER , such as MR16. Dc voltage in the box internal is transformed into 12 v output to light sit interface.
5, Parameters for GU10,E14, E26/ E27 /G24/MR16 and so on …can be tested (voltage, current, power, power factor, annual current consumption )
6, Design for dimmable: Dimmable engine and Dimmable switch; there are two positions for dimmable switch-DIMMBALE and NON-DIMMABLE. When put the switch on dimmable position, the brightness for all dimmable lamps can be adjusted. When put the switch on Non-dimmable position, all the dimmable lamps can’t be adjusted. So it can be tested that if the brightness of the lamp can be adjusted.
7, three wire clamps (2 PCS AC output and DC 12 output) and one AC output universal socket. It’s convenient for external power source. Every lamp socket has a unique switch and mark, which is convenient for identification and control.
8, One storehouse is for small things; 3 foundation plates are to protect the case; a pull rode is convenient for moving.
AC Meter Instruction
1, AC voltage Parameter:Input voltage can be displayed; support international use; voltage ranges from 86~264V. Overseas voltage can be shown for overseas use.DC voltage Parameter:DC12V
2, AC current parameter: Input Current can be displayed. The measurement for current is accurate to mA. The accuracy is about 1/1000.the measuring range is 4A.
3, AC Power parameter:AC power display area: Power can be displayed. Power meter is correct to 1 decimal point. So, it can show the change and contrast of power correctly. The ultimate power is 999.9w. If it surpasses 999.9, it will be showed as HHHHH.
4, Power Factor(PF) parameter:LED power factor can be displayed. (PF is a very important parameter for LED; power factor for traditional lamp is only 1)
5, Annual Power consumption parameter :Annual power consumption display area: Annual power consumption can be displayed (ten hours power on per day)
6, Frequency parameter:Frequency display area: The frequency for relative state grid can be showed. Some frequency abroad is 60Hz.
7, DC Power parameter: The power of the DC12V lamp can be showed.In current, voltage, power, power factor, power, in charge
Notes: Wiring must be connected as shown below method, otherwise, it may cause damage to the tester.
TAnnual Power Consumption setting:
S1 configuration |
||
1 |
2 |
Annual Power Consumption calculation |
OFF |
OFF |
8 hours per day |
ON |
OFF |
10 hours per day |
OFF |
ON |
12 hours per day |
ON |
ON |
24 hours per day |
Packing instruction
Packing: Paper Cartons,with EPE foam holders inside,suitable for international transportation.
Product size:L34*W20*H13 (Unit: cm)
Net weight:2.91KG
Gross Weight:3KG
Some other led case