Konica 512 14pl / 42pl print head Konica minolta KM512 printhead cleaner machine
1. Application
Versatile print head cleaner machine,can clean printhead as below:
Xaar 126/ 128/ 382/1001/1002/1003...
R icoh G4/G5..
Usually it can be clean in a few minute and back to work again like usual before it was. To make period of cleaning process to print head is very important, because this can protract the life of print head much longer, and decrease the waste for print head clog, save printing cost.
Before use printhead cleaner machine
After use printhead cleaner machine
Type of Cleaning Machine
Model No. | Print head type | Using Ink type | |
1 | LD-CM01 | Spectra, Seiko, Konica, Xaar 128/300/500 etc | Solvent ink |
2 | LD-CM02 | Xaar/ Seiko/ Konica/ Spectra Polaris/R icoh etc | UV ink/ solvent ink/eco-solvent ink |
3 | LD-CM03 | DX5/DX7/XP600/DX11/DX12/TX800... | eco-solvent ink/UV ink/ subliamtion ink |
Operation :
Step1 :Open the bottom lid of the machine and the lid of cleaning fluid tank
Step2:Pour cleaning fluid into the cleaning fluid tank.. The minimum should be over the water outlet port of the tank
Step3:Cover the cleaning fluid tank lid .and then the bottom lid of the machine
Step4 :Open the top lid and put onnozzle holder
Step5:To connect the inlet of print head to the flushing pipe
Step6 :To insert the print head into nozzle holder
Step7 :The inserted print head
Step8 :Pour cleaning fluid into the cleaning tank ,to close to the water outlet port
Pre-Sales Service
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
After-Sales Service
* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery online.