Kafuter Red RTV High temperature intaker exhaust manifolds thermostat housings Silicone Gasket Maker

Kafuter Red RTV High temperature intaker exhaust manifolds thermostat housings Silicone Gasket Maker

Characteristics:

High-classified silver gasket maker, neutral, fast cure, environmental, no-dripping gel formulation, no toxic, corrosion and shrinkage, excellent gas, water, oil-sealing and aging resistance, easy to assembly for next maintenance, temperature range: -60°C to 300°C, endure pressure of 12mpa. Apply in the places which need requirements on fast-sealing, especially bond in the different transported tools in order to develop its work efficiency.

Typical Properties:

Applications:

Fast sealing and anti-shaking of engines, water pumps, valve covers, oil sumps, gear boxes, thermostats in high-grade cars, imported cars, motor vessel, etc. also, fast-sealing of high-temp fields, such as, in hardware, machinery, electronic, and chemical equipments, etc.

User's Guide: 

1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease

2. Remove the cap, puncture inner seal of the tube, screw on nozzle with a desired size

3. Apply continuous, uniform 1~4mm bead around perimeter of one surface. or completely surround all bolt holes

4. Wait about 10 minutes for glue to skin over. Then reassemble the parts

5. Gasket maker dries to touch in 1 hour and allow to bond after 24 hour fully curing. 

Notes: 

1. Clean the assembled parts by removing the oil and grease.

2. it wll release some acid odor when assemble the parts, so using in an adequate ventilated place.

3. Screw the nozzle tightly after using in order to avoid it curing inside the tube

4.Keep away from children prevent their contacting.

Packing Specifications:

Q: What information is needed for quotation quickly?

A:Please let us know your destination port, normal quantity, and payment term you like, then we can mail the quotation to you in 24 hours since receiving your inquiry.

Q:How about the sample testing?

A:After confirming the adhesive code with customers, we can provide free sample ,only need to charge the shipping cost.

Q: How long can I expect to get the sample?

A: 3-5 days under normal conditions.

Q:What about the payment term?

A:Normally we accept the western union and paypal, the cargo can be ready for delivery in 7 days after we receive the payment.

Q:Are you a factory or trading company? 

A: We are a factory.We are expert in adhesive and sealant since 1992, more than 25 years experience in production and sale.