KSD 301 40-210C Bimetal Thermal Control thermostat Ceramic bimetal switch
KSD 301 40-210C Bimetal Thermal Control thermostat Ceramic bimetal switch
Description:
KSD301-U series coffee pot bimetal thermostat is specially designed for the appliances with one shot overheat protection, prevention of excessive temperature rise. It can be customized to reset below the low temperature of -35℃, or never reset. It can be used in the appliance with excessive temperature protection such as oven, toaster, copier, printer and so on.
Advantages:
Easy mounting.
Rapid heat transmission.
No breakdown, no flashover.
Parameter:
|
Use |
Overheat protection |
|
Appliance |
Coffee maker/ Drinking machine/toaster/Microwave oven/ Heating/ Portable Refrigerator/etc |
|
Reset type |
One-shot type |
|
Base material |
Ceramic/ Resin base |
|
Amperage |
5A/10A/16A |
|
Max. Operating Temperature |
Resin base:170°C Ceramic base:220°C |
|
Differential |
Refer to the regulation |
|
Tolerance |
Refer to the regulation |
|
Protection class |
IP00 |
|
Contact material |
Silver/Gold |
|
Dielectric Strength |
Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover. |
|
Insulation Resistance |
With a DC 500V megger, borne DC 500V, the tested value is over 10MW. |
|
Resistance Between Terminals |
Below 50mW |
|
Temp. characteristics: |
The thermostat switches on at room temperature and it won't be able to reset after switching off. |
|
Maximum ambient temperature |
Ceramic:280°C(Long period) 310°C (Less than 15 min) Resin: 205°C(Long period) 235°C (Less than 15 min) |
|
Diameter of bimetal disc |
F12.8mm(1/2″) |
|
Approvals |
UL/CQC/TUV |
|
Terminal type |
Customized (Refer to our specification) |
|
Cover/Bracket |
Customized (Refer to our specification) |
Safety certificate:
| Max OT | 250V 10A | 125V 16A | 250V 16A |
| 40-185 ℃ | CQC | ||
| 185-280 ℃ | CQC | ||
| 60-270 ℃ | VDE | ||
| 60-220 ℃ | VDE | ||
| 210 ℃ | |
Order detail:
|
Packaging details |
200pcs per inner box, 5 box(1000pcs) per carton, the carton size is 480(L)*282(W)*218(H)(mm) |
|
Minimum order quantity |
1000 pcs |
|
Payment terms |
T/T, West Union |
|
Delivery time |
15~20 days |
Installation and Direction for Use:
* Method of earth: By means of the metal cup of thermostat connected in the earthing metal part.
* The thermostat should work in environment with humidity not higher than 90%, free of caustic, flammable gas and conducting dust.
* When the thermostat is used to sense the temperature of solid items, its cover should be clung to the heating part of such items. Meanwhile, heat-conducting silicon grease, or other heat media of similar nature, should be applied to the cover's surface.
* If the thermostat is used to sense the temperature of liquids or steam, it is strongly recommended to adopt a version with stainless-steeled cup. Moreover, cautious measures should be taken to prevent liquids getting into/onto the thermostat's insulation parts.
* The top of the cup must not be pressed to sink, so as to avoid adverse effect on the thermostat's temperature sensitivity or its other functions.
* Liquids must be kept out of the thermostat's inner part! The base must avid any force that could lead to crack; it should be kept clear and away from the pollution of electric substance to prevent insulation weakening that leads to short-circuited damages.
* The terminals should be bent, or else, the reliability of electric connection will be influenced.
Bimetal thermostats recommendation:
TERMINALS AND COVERS OF THE SNAP-ACTION 16A 250V/125V CERAMIC MANUAL THERMOSTAT CAN BE CUSTOMIZED UNDER YOUR REQUEST. PLEASE REFER TO OUR SPECIFICATION. WELCOME TO OUR WEBSITE TO GET MORE INFORMATION ABOUT FSTB THERMOSTATS.
( http://www.thermostat-gb.com/ )
Our Company:
FSTB began to manufacture thermostats in 1982, with many years of development, FSTB became the leading thermostat manufacturer in market and scale of industry worldwide, it has 10 sub-companies with professional bimetal raw material development and production base in upstream of industrial chain,as well as various kinds od thermostats and protectors production base in the downstream of industrial chain.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier