high temperature Vacuum brzaing furnace / vacuum muffle furnace / vacuum heat treatment furnace
Max. vacuum rate: 10-3 Pa
Max.tem:1600C
30 steps programmable&auto control
CE & Warranty 1 year
Vacuum furnace for carbonization process of carbon products
Introduction of vacum carbon furnace
Kejia series vacuum furnace is widely used for heating treatment of metal materials in low vacuum, recursive, protective atmosphere, also can be used for heating treatment of special materials, such as carbonization process of carbon products. The furnace chamber is ceramic fiber with excellent thermal insulation; Vacuum Reservoir with water cooling system.
Features of kejia vacuum furnace:
1.Double layer steel casting with air cooling fans to keep case temperature lower;
2.High purity fiber alumina board chamber for the best energy saving;
3.The temperature is controlled by precision SCR(Silicon Controlled Rectifier) with accuracy +/-1 C and 30 segments programmable control;
4.The fast rate of temperature increasing and decreasing.
5.The furnace chamber is ceramic fiber brick with excellent thermal insulation,vacuum
reservoir with water cooling system;
6.The furnace is equipped with the function of power off automatically when door
furnace opening,function of over temperature alarm,etc.
Technical parameters of vacuum carbon furnace
Code | KJ-1200VF | KJ-1400VF | KJ-1600VF |
Chamber Size (mm) | customizable | customizable | customizable |
Max. Temperature | 1200°C | 1400°C | 1600°C |
Working Temperature | 1100°C | 1300°C | 1500°C |
Temperature Control | 30 segments programmable and PID auto control | 30 segments programmable and PID auto control | 30 segments programmable and PID auto control |
Heating Element | Fe-Cr-Al-Mo wire | SiC heater | MoSi2 heater |
Heating Rate | ≤20°C/min | ≤15°C/min | ≤15°C/min |
Temperature Accuracy | ±1°C | ±1°C | ±1°C |
Max. Vacuum | 10-3 Pa | 10-3 Pa | 10-3 Pa |
we have all kinds of vacuum furnace for your choice
details of the vacuum flange
small vacuum furnace
1. Are you a manufacturer or trade company ?
Yes,you can assured that we are a producer with full experience
doing business in domestic and oversea.
2. We are not professional for operation and installation of your machine?
While it is not a stumbling block,our machine is easy to operate,no need
to professional training,and the instruction manual and vedio sent to you
are enough.What’s more,we have professional engineers and they can solve all questions.
3. How about packaging ?………….if machine damaged,what should I do ?
Usually machine is packed with wooden case and standard export carton,
plywood carton or as your requirement.Damage haven’t happened before,
if happen,we will arrange replacement.
4. We haven’t do business before,how can I trust your company and machine ?
We have been GOLD supplier for three years with no complaints on Alibaba.
and our machine have exported to Eath Asia,South Asia,the middle East Asia,
Africa etc. areas and have a good feedback.
Contact information:
Contact person: Tanya Wang
mobile: 0086 18137195603
Skype: tanyawang55
Email: export(at)kejiafurnace.com