Main Features: | ||||||||
☑ Adopt totally sealing structure with good property of moisture-proofing. | ||||||||
☑ Majorized design by computer with reasonable structure, light dead-weight, strong attraction force and low energy consumption. | ||||||||
☑The energizing coils are processed by special technology to improve the electrical property and mechanical property. | ||||||||
☑Heat-resistant grade of insulating material reaches grade C with long service life. | ||||||||
☑Rated power-on sustaining rate of normal type electromagnet is increased from 50% to 60%,which improves the efficiency of the electromagnet. | ||||||||
☑High temperature type electromagnet adopts unique method of heat protection, the temperature of the attached materials is increased from 600 °C to 700 °C, which expands application range of the electromagnet. | ||||||||
☑Simple and convenient installation, operation and maintenance. |
☑ Magnetizing coils dia is pure annealed wire wound and above these are strip wound. ☑ The glass insulation of class h standard with fibreglass tape forming an interlayer makes coil withstand high temperature.☑ Coil material, usually aluminum coil. Copper coil customization is also supported. |
Shells of lifting magnets: | ||
☑ They are made from high permeability steel casting properly machined, to provide the most efficient magnetic circuit. ☑ Center & outer poles are machined from high permeability magnet steel with cored recesses arrangement to protect heads of through tensile bolts.☑ The faces of poles from spigot joints in magnet shell , the outer poles of larger magnets are skirted for added protection. The pole shoes are easily replaceable. |
☑ Terminal box is designed to ensure protection whilst in operation and are of double entry type enabling the leads from the coils to be sealed in a separate cavity. ☑ The outside cable is brought through a gland into this second compartment ensuring no possibility of moisture entering the windings. |
Battery-powered (power failure safety system): | ||
☑ Complete system: the solenoid, the power supply (cable reel as optional) and every wire of the electrical Control Box and circuit. ☑ The system complies with voltage, electrical resistance, and electrical safety standards. ☑ We are also in charge of supplying support batteries to prevent the accidental release of the load in case of power supply failure. We give at least 20 extra minutes of power supply by the battery. |