New Design Automatic Customized Bred Rabbit Cage For Poultry Farming Equipment
A complete bred rabbit cage cage comprises a cage body as well as ancillary equipment. The cage is composed of cage door, cage bottom (foot net, pedal, bottom board), side net (both sides), back window, cage top (top net) and dung board.
Specification parameter:
Hutch before 45 cm high, 40 cm high, 60 cm deep, 60 cm wide, left and right, such a specification can basically meet the needs of various adult rabbits. The bottom cage is not less than 20 cm from the ground, the upper and lower cage spacing is 5 cm, and then 10 cm, the number of layers is not more than 3, the total height (ground from the upper cage top) is about 170 cm. Too much is not only a waste of materials, but also detrimental to observation, feeding and cleaning.
Design requirements :
The general design should be consistent with the biological characteristics of rabbit , low cost, durable, easy operation and management. The rabbit hutch specifications, size shall be determined according to the type of Angora rabbit strains and the different gender and age. In general, rabbit body length scale, long cage body length of 1.5 ~ 2 times the width of the cage body length of 1.3 to 1.5 times as high cage body length 0.8 ~ 1.2 times. Size should be in order to ensure long haired rabbit in the cage free movement, easy to operate management principle.
Cage height :
Multilayer hutch commonly used in China, the general assembly is composed of 3 layers arranged. In order to facilitate the operation and maintenance management, hutch in the 3 layer is appropriate, the total height should be controlled in the 2 meters. The bottom of the cage height should be 25 cm or more, in order to facilitate ventilation and moisture, make the rabbit also has better living environment.
Galvanizing process:
New zinc plating process | Traditional galvanizing process | |
1: Degreasing | With the addition of chemical oil and electrolytic oil removal, the oil removal efficiency reached 98%. | Take direct pickling, only derusting, not degreasing, degreasing effect is only 30%. |
2:Derusting | Hydrochloric acid is by heating derusting, computer visual operation, the air is detained for a short time (about 1 minutes), effectively avoid the two rust. The rust removal effect reached 98%. | Room temperature acid washing, artificial transportation, in the air for a long time (about 15-30 minutes), resulting in two times rust, rust removal effect is only 60%. Poor galvanizing effect and short service life. |
3: Galvanized | During the galvanizing process, the air is agitated and the plating is mechanically oscillating. Each tank has a filter, which does not adhere to impurities. The zinc coating is evenly distributed and the thickness of the zinc layer is increased from 0.03 mm to 0.05 mm. 12 kilograms of zinc per ton of finished products. |
The plating parts are in a stationary state in the zinc plating bath, the zinc plating is unevenly distributed, some places are thick, some places are thin, and the galvanizing time is not easy to control, and the quality of the products is different. 8 tons per ton of finished products, more than more than 10 kg thick place, thin place less than 2 kilograms, and prone to leakage plating phenomenon. |
4: Cleaning | Clean water, water is neutral water. It doesn't affect the zinc coating. | Clean water, water containing acid or alkali, corrosion of zinc layer, causing the zinc layer to fall off. |
5: Forming | Hot air drying, the temperature is consistent, the product gloss is consistent | Natural drying, affected by weather conditions, rainy days or lower temperatures, zinc coating easily oxidized, net rust. |
Our products can be customized according to customer choice of zinc plating process
Installation of water fountain:
The automatic water fountain is mounted on the back board, and the water pipe is parallel to the plate (the rabbit can not catch or bite the water pipe). Such as home-made water dispenser, it should be hung at the front door, easy to observe the water level and timely replenishment.
Material box installation
The material box is best made into plug-in type. When the rabbit is fed, the head extends out of the steel door and can not be laid off, and is convenient for manual feeding. Can also be placed in the box door, but to maintain a certain height, in order to prevent rabbit scratch.
In addition, our company develops the advanced automatic feeding system, manure removing system, egg collection system, drinking system, temperature control system, disinfection and spraying system, sound-light alarming system, etc. Also our company has professional senior engineers and technicians who can provide the poultry breeding place selection, chicken house design, cage layout and other complete series of services.
More Detail Call +86 199 3960 1098 Or Scan As Below Code Can Get Chicken House Design Draw For Free.