Jewelry Making Tool Diamond and Moissanite Tester Best Diamond Tester

Jewelry Making Tool Diamond and Moissanite Tester Best Diamond Tester

 Instructions

1 Turn on the power switch
2 WAIT light is off for 10 seconds, the ready light is on. Preheating for about two minutes. Don't be too long, there will be a prompt sound.
3 Holding the side drill pen in the right hand, placing the right finger on the metal panel behind the drill pen, holding the diamond tray in the left hand
4 Gently use the probe to touch the object to be tested. The force track is the writing force and is in vertical contact with the surface for about one second.
5 If it is not a diamond, there will be no performance. If it is a diamond, the buzzer will be a diamond. If it is silicon carbide (that is, Moissanite), the tone will change.
6 After the beep is heard, you must continue to detect for one second. This is because the diamond is detected before the detection of moissanite in 0.5 seconds.
7 If you change the tone, you remove the side drill pen. You must re-detect because the side drill pen may touch the metal plate.
8 In order to save power, turn off the power after checking. If you forget the test pen will remind you within three minutes.
9 If the yellow light is on, the READY light is off, you need to replace the 9V alkaline battery.

We usually will ship by DHL, FedEx, UPS, TNT, EMS. For heavy of large quantity of goods, we usually suggest ship by sea or by air.

General Order Information

We take great pride in our work and in the wide variety of products that we offer. We are experienced in servicing the US market, European market and Africa market .Please be aware that our production lead times depend on specific items and item quantities. Our success has been based on our understanding of the demands. That's why we always ensure that every order is delivered on time. 

Check below for more information on placing an order
1. Inquiry-Professional quotation.
2. Confirm the price, lead time, payment term etc.
3. Tasanol sales send the Proforma Invoice as order.
4. Customer make the payment for deposit and send us Bank receipt.
5. Initial Production Stage-Inform the clients that we have got the payment,And will make the samples according to your request, send you photos or Samples to get your approval. After approval, we inform that we will arrange the production & inform the estimated time.
6. Middle Production-send photos to show the production line which you can see your products in . Confirm the estimated delivery time again.
7. End Production-Mass production products photos and samples will send to you for approval. You can also arrange the third party Inspection .
8. Clients make payment for balance and Tasanol Ship the goods .Also can accept payment term-Balance against B/L Copy Or L/C payment Term. Inform the tracking number and check the statuds for clients. 
9. Order can be say finish when you receive the goods and satisfy with them .

Shenzhen OLN Electronic Technology Co., Ltd,TASANOL is our Brand, and we  has experience in hand tools industry for a few years. We will focus our business on jewelry making tools,polishing tool, engraving machine, melting machine, faceting machine, fishing tools, mini pliers and other cutting tools,etc..

Tasanol is targeting top quality and the whole team will pay great attention to every detail to make the products stand on the top level. All our products meet international quality standard so as to satisfy every customer's demands.

Both time and society have undergone a significant change, but Tasanol will always be devoted to provide our customers with perfect quality, outstanding efficiency and sustainable services.

Tasanol always holds the principle of "Profession, Devotion, Cooperation and Win-Win", and continually provides clients with quality products and best services!
Welcome to visit and look forward to hearing from you!