Item | HINS40car battery |
Reserved Capacity | 120min |
size | 196*129*201mm |
nominal voltage | 12v |
Nominal Capacity(20HR) | 40Ah |
Seperator | PP Seperator |
Brand Name | your own-brand name available |
CCA (-18oC) | 320 |
Flame retardant container | PP or Rubber |
Applications | starting battery for cars, buses, trucks and other vehicles |
Certificate | ISO9001, ISO14001, CE, SASO, SONCAP etc |
Dimension | Custom-made Special Dimension |
Features
1.Applications: Starting battery for gasoline engine tricycles and cars,
motorboats, motorcycles, ATVs, buses, trucks golf cart, Tractor,
Mine vehicle and other vehicles and so on..
2. Delivery: Within 30 days after signing contract and receiving 30% deposit
3. Packaging: Cartons with pallet
4. Deliver from Shanghai, China
5. Certificate: ISO9001: 2000, ISO14001, ISO/TS 16949, CE, SONCAP etc
6. Custom-made Special Dimension (Even provide Brand & carton design)
7. Enhanced safety; Excellent starting performance at cold temperatures; Low self-discharge and water consumption
Health and safely |
Precautions
• Always handle batteries with care.
• Always store upright.
• Never over-fill with acid.
• Always charge in a well ventilated place.
• Always wear eye protection when handling batteries.
• Wear protective clothing if there is any rick of acid splashing.
Danger
• Do not use at the places near fire. Hydrogen gas generated from battery may cause fire and explosion.
• This 12v battery is only for starting engine. Do not apply for other uses.
• Keep out of the reach of children or the personnel who do not understand the manual. It may cause blindness or severe burn.
• When using the battery, wear safety glasses and rubber gloves.Sulfuric acid may cause blindness or severe burn.
Warning
• Replacement of battery shall be performed as per following order. If failed, it may cause fire and explosion. Remove cable from negative terminal first.Connect cable to negative terminal last.
• When connect cable to battery, make sure not to get changed post of +and -. It may cause the damage of electronic components or fire.
• When ueing the battery ,handle with care,sulfuric acid may cause blindness or severe burn.
Caution
• When moving battery, be careful not to drop the battery , which is heavy, Do not shake the battery with handle, if there is the handle, It may cause the injury.
• Do not shore the battery at the following places. High temperature and humidity. Being exposed to rain,snow, direct sunshine.
Trade terms | FOB CIF EXW |
Payment terms | T/T,L/C |
Delivery time | 25- 30 days |
Packing | Cartons and Pallet |
Shipping | By sea |
FAQ |
Q1: What is your terms of payment?
A: 30% deposit in advance, 70% balance pay off against the copy of bill of loading.We'll show you the photos of the products and packages before you pay the balance.
Q2: What’s kinds of battery will you provide?
A: We have three type battery: There are many different model battery here, we can supply 2v 100ah-3000ah battery, 4v 0.25ah-4v 4.5ah battery, 6v 1.3ah-6v 12ah battery, 12v 0.8ah-12v 250ah battery.
Q3: Operating temperature
A: Discharge: -15--40C
Charge: 0--40C
Storage:-15--40C
Q4: Can you print my logo on the battery cover?
A: Yes, OEM is available,we can print your logo on the battery case, and you can offer your logo.
Q5: How to maintain the battery?
A:The battery should be stored in clean, dry, ventilated, dark environment when not using, keep it after full charge, recharge it every 3 months or 6 months.
Q6: If a battery fails, what will be the indications?
A: 1.Lower performance
2.Low voltage
3.Cannot charge/recharge
4.Swelled container
5.Acid corrosion
Q7: How can you tell if a battery is good or bad?
A: You should first check the battery for defects such as a broken circuit, a short, or a broken container. If an outward problem is not apparent, then you will have to check the battery's capacity using known measuring techniques to ascertain the problem.
Q8: Why "zero voltage" might happen?
A: Zero voltage means there is a broken circuit. There could be several reasons for a zero voltage state.
1.There could be a broken electrode column
2.Welding defects of the partition
3.Welding defects of the terminal