JS Series 101 OMR spool valve hydraulic orbital motor specification like below :
It's design features :
Design Features :
1. Geroler design , including ring , star , needle ;
2. Use high pressure capacity shaft seal ;
3. Wide variety of mounting flanges , shafts , and displacement provides design flexibility ;
4. Direction of shaft rotation and speed can be controlled easily and smoothly ;
5. No bearing between shaft and housing ;
6. High efficiency ;
7. Smooth low speed operation ;
8. Extended motor life ;
9. Extended leak-free performance ;
It's dimension like beow :
It's specification data :
Displ. cm3/r |
50 |
63 |
80 |
100 |
125 |
160 |
200 |
250 |
305 |
370 |
395 |
|
Max Speed RPM |
Continuous |
698 |
663 |
679 |
558 |
452 |
354 |
284 |
235 |
178 |
147 |
145 |
Intermittent |
859 |
774 |
811 |
669 |
544 |
425 |
339 |
281 |
208 |
173 |
171 |
|
Flow LPM |
Continuous |
38 |
45 |
57 |
57 |
57 |
57 |
57 |
57 |
57 |
57 |
57 |
Intermittent |
45 |
53 |
68 |
68 |
68 |
68 |
68 |
68 |
68 |
68 |
68 |
|
Torque N.m |
Continuous |
73 |
86 |
124 |
154 |
194 |
228 |
285 |
304 |
364 |
435 |
46 |
Intermittent |
84 |
93 |
139 |
173 |
216 |
261 |
319 |
378 |
403 |
516 |
552 |
|
Pressure Bar |
Continuous |
124 |
124 |
124 |
124 |
124 |
115 |
110 |
100 |
90 |
90 |
90 |
Intermittent |
138 |
138 |
138 |
138 |
138 |
124 |
124 |
124 |
124 |
110 |
110 |
|
Maximum Case Pressure ------Without Case Drain is 90 Bar . |
It's performance data :
It's application :
JS Series 101 OMR hydraulic orbital motor is widely used in Agricultural augers, harvesters , speeders ; Car wash brushes ; Food processing ; Railroad maintenance equipment; Machine tools ; Conveyors ; Industrial sweepers and floor polishers ; Wood sawing machine ; Turf equipment ; Concrete and asphalt equipment ; Skid steer attachments and etc .
RECOMMANDATION :
1. Maximum RPM and maximum pressure simultaneously NOT recommended .
2.Special high pressure capacity shaft seal ensures back pressure up to 10 Mpa. Recommended preferable back pressure 5 Mpa. Case drain line is recommended when back pressure higher than 5 Mpa .When case drain line is used , make sure the motor is always filled with oil . The motor life is benefited from a case drain line .
3.Recommended fluids : Anti-wear type of hydraulic oil . Viscosity recommended 37-73 cSt. Recommended filtration ISO 18/13. Maximum operating temperature recommended 80 oC.
4 . It is highly recommended that the motor runs at 30% of rated pressure for at least one hour before application of full load . Be sure the motor is filled with fluid prior to any load application .