JKP1001 12v Oil Extractor Pump/Manual Diesel Pump
12V 5A Oil/Diesel Fluid Extractor Electric Transfer Pump For Car/Motorbike
12V 5A Oil/Diesel Fluid Extractor Electric Transfer Pump For Car/Motorbike
The oil pump can use for diesel,heating or motor oil. Ideal equipment for quick and clean oil changes. The oil pump works by connecting the clamps to the 12V car battery. Oil inlet pipe 1.2m length&6mm,oil outlet pipe 1.5m length &13mm,Out piece,2 clamps for car battery,2 hose clamps
| ||
| ||
| ||
| ||
Oil Scavenge Pump |
12V 5A Oil/Diesel Fluid Extractor Electric Transfer Pump For Car/Motorbike
1.We accept OEM program.
We can design the packing for the gift box, blister card, sleeve card for free.
2. We can prepare samples for cunstomers to test.
One or two pcs samples are free of charge, but the courier cost is to collect.
Pls provide your courier account # like UPS,DHL, FEDEX when you decicde to order a sample .
12V 5A Oil/Diesel Fluid Extractor Electric Transfer Pump For Car/Motorbike
Q&A:
1.When did SANSEN start the business of OIL EXTRACTION PUMP/OIL EXTRACTOR ?
Since 1996
__________________________________________________________________________________________
2.How to order a sample?
One or two pcs samples are free of charge, but the courier cost is to collect. Pls provide your courier account # like UPS,DHL, FEDEX when you decicde to order a sample .
.
___________________________________________________________________________________________
3.What is the lead time for the sample?
2 days to one week .
___________________________________________________________________________________________
4.Which port is the nearest to SANSEN?
Shanghai Port or Ningbo Port, but the goods also can be delivered to Guangzhou or Shenzhen port.
Working condition:
1> Operates from the cigarette lighter socket of a DC- 12V
2> With inflator nozzle and sports needle
3> Proper design for installing hose and cord
4> Ideal for inflating all vehicle tires and other high-pressure inflatables
5> It is good for the emergency needs when you are on highway and country side road rushing for office on the morning while the tire is at a low pressure.
Operating the compressor:
step 1:Pull out the air hose, make sure the nozzle lever is in the up position.
step 2:Place the nozzle over the valve stem of the tyre or other item you need to inflate.
step 3:Lock the nozzle to the vale stem by pressing down on the lever.
step 4:Switch the compressor/spotlight switch to the COMPRESSOR position to turn the compressor on. Monitor the pressure gauge carefully.
step 5:When the desired pressure has been reached press the compressor/spotlight switch to the OFF position to turn the compressor off. Disconnect the air hose and replace it inside the unit.
NOTE:
Sometimes, when the tyre is completely deflated, the seal between the tyre and the rim can be broken. This allows the air to leak when you are using the compressor. To fix this problem, you have to jack up your car prior to inflating the tyre.
To inflate other articles, select the appropriate nozzle adaptor and insert it into the nozzle at the end of the compressor hose making sure that the nozzle lever is in the up position. Press down on the nozzle lever to lock the adaptor into place.
For spots balls, the needle should be moistened before inserting it into the ball valve.
CAUTION:
Bursting items can cause injury so don't exceed recommended pressure level.
12V 5A Oil/Diesel Fluid Extractor Electric Transfer Pump For Car/Motorbike