JEEJA 3d laser crystal rechargeable light base for glassware award and trophy

3 AAA battery option (not included)

built-in 2200mah li-battery option

AC adapter option (USB wire 1USD each )

1. Take out the light from the package and put it on flat place.

2. Press the red button on the light to switch the light on standby.

3. Remove the insulating strip from the battery compartment of the remote.

4. Direct the controller towards the light face to press ON to turn on the light.

5. Press one of the color buttons for solid color.

6. Press ↓ to decrease the brightness of solid color, and press ↑ to make brighter.

7. Press FADE and the light rotation will seamlessly blend from color to color.

8. Press JUMP and the tones will rotate by jumping from color to color.

9. Press RESET to return the light to brightest red solid color.

10. Press OFF to turn the light off. And please press the red button again on the light to cut off the power supply.

1. Remove the battery compartment at the reverse base

2. Insert 3 AA batteries into the compartment according to the polarity shown and replace compartment

3. Go steps as Ⅰ.1--Ⅰ.10 to use the light

1. Request an adapter with 5V & 2 AH output

2. Connect the cable to the adapter and the light and plug the adapter to the outlet

3. Go steps as Ⅰ.1--Ⅰ.10 to use the light

4. If the red indicator is on, the built-in Lithium is being charged; if the green indicator is on, the battery charging is completed.

Using just 10 LED’s within a small plinth, any object placed on top of the plinth will be uplit and transformed into a vibrant colourful display.

The plinth itself is 4.3 inches square with a central 3 inch circular lens covering the 10 super bright LED’s. This makes it the perfect size for beer, wine, or spirit bottles.

This unit will mainly be used to display drinks bottles, either behind a bar or in the retail sector, but it can also be used for countless other applications!

Any transparent object, shampoo bottles, perfume, or even cut glass, which will fit onto the platform can instantly become part of your lighting display.

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 

A: Low MOQ, 1pc for sample checking is available

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

A: Yes, we offer 1 years warranty to our products.

shenzhen 3d laser crystal engraving wedding favor with black rechargeable base