Italy loxeal UV glue for glass to metal and glass to glass
Loxeal UV adhesive glue with it's high bonding strength, fast curing speed, it's a perfect adhersive for bonding glass to glass or glass to metal. No whitening after bonding, no bubbles, no glue marks, no corrosion, no cracking. Suitable for bonding and assembly of high-grade glass furniture, lighting and wash basins. Before applying the glue, the surface to be bonded must be completely clean and dry. Determine the amount of glue according to the needs. After the glue is applied, close the bonding surface and squeeze it to make the glue layer evenly distributed and discharge the bubbles. Place it under the UV lamp for a few seconds, remove excess glue around, continue to irradiate 10-20S to achieve maximum strength. keep the UV glue in a cool dry place, the remaining glue can not be returned to the original packaging. (Optimized to be stored at 0-25 °C).
Viscosity(25degrees) | 10 to 100.000mPa.s |
Density | 1.05g/cm3 |
Soildification time | 5-30 seconds |
Application |
3020:gkass to glass, glass to crystal, 3021:glass to metal, 3023 glass to glass |
Color | Transparent |
Fitting thickness | 0.03-0.3mm |