Iron flower hydraulic press metal stamping machine 500 ton

Iron flower hydraulic press metal stamping machine 500 ton

1. The computer optimized structure design of 500 tons of three-beam four-column hydraulic press, three-beam four-column structure, simple, economical and useful.
2. hydraulic control selects the cartridge valve integrated system, the action is firm, the service life is long, the hydraulic impact is small, and the connecting pipeline and the leakage point are reduced.
3. independent electrical control system, reliable operation, intuitive operation, maintenance.
4. the use of button centralized control, with adjustment, manual and semi-active three operating methods.
5. After selecting through the operation panel, it can complete two forming skills, such as fixed stroke and constant pressure, and has the functions of holding pressure delay.
6. The working pressure of the slider, the travel schedule of the idle express and the slow operation can be adjusted according to the skill requirements. 

First using laser machine to cut metal plate to some shape, then using hydraulic press with  a mold to emboss, and finally the formed metal flower is taken out and welded to the metal pipe.

The machine is equipped with an infrared protection screen, a two-hand start button, a cooler, a punching buffer cylinder, a hydraulic pad, and a dosing cylinder. 

And brand of these accessories can be changed as your need.

1. Distortion: This is the process of twisting the blank and twisting it to a certain angle.
2. Bending: This is a forming process of bending a blank into a certain angle and shape along a curved line.
3. Curling: This is a stamping process in which the end of the sheet is bent to bring it close to a closed circle.
4. Flip hole: This is the process of punching the edge of the vertical hole on the unperforated plate.
5. Flanging: This is a stamping process in which the edge of the blank or the edge of the curved surface is turned up along the curve.
6. Drawing: This is a stamping process in which the blank is drawn into a hollow body or the hollow body is drawn into a smaller hollow body.
7. Flare: This is the process of expanding the radial dimension of the end of the hollow or tubular blank.
8. Shrink: In contrast to the previous one, this is the process of shrinking the radial dimension of the end of the hollow or tubular blank.
9. Cold extrusion: At room temperature, the metal material is plastically deformed by the die, thereby undergoing volume transfer and extrusion molding.
10. Bulging shape: The inside of the hollow blank is subjected to two-way tensile stress, thereby causing plastic deformation, and finally a convex-shaped piece is obtained.
11. Forming: The sheet is locally plastically deformed and then directly formed into a shape according to the shape of the die or the punch. 

Our company is one of the professional production enterprise of hydraulic press in China. The company was established in since 2006, like 13 years, in the past 13 years, we are always devoted ourself in providing hydraulic press machine for All over world company, like America, Canada, Russia, Japan, some countries in Africa, European area.