Involute Spline Broach Spline Broaching Tool Internal Spline Broaches

Give us the drawing or details, we make OEM for you

We are manufacture of spline broach in Shanghai, China

1.Accuracy:H4,H5,H6,H7
2.P.A.30 or 40 degree
3.module: m1~m5
4.No. of teeth: 11~40

involute spline broach , internal gear broaches , square broaches

 NOTE : 

 1. Involute spline broaches with standard pressure angle 30°

      2. Fine pitch involute spline broaches of m0.5~m0.8 base circle dia.≥ 6mm can be ordered  

      3.Involute serration broaches with standard P.A.45°, m0.5~m2.5 can also be ordered.

Material Introduction:

A. W6Mo5Cr4V2 (GB)  M2( ASTM), S6-5-2(DIN), SKH51(JIS)
   chemical composition:C 0.85, Si 0.38, Mn 0.35, P≤0.030, S≤0.030,  Cr 4.10, W 6.00, Mo 4.80 V 1.85
   main application:It is widely used for making all kinds of cutters and durability cold-work die

B. W6Mo5Cr4V2Co5 (GB), M35( ASTM), 1.3243(DIN), SKH55(JIS)
   chemical composition: C 0.93, Si 0.38, Mn 0.35, P≤0.030, S≤0.030, Cr 4.10, W 6.30, Mo 4.80 V 1.85, Co 5.00
   main application:It is often used for making blades with  high-speed and great cutting difficulty as it’s good abrasive resistance

W6Mo5Cr4V2(M2),W9Mo3Cr4V(W9),W18Cr4V(W18),W6Mo5Cr4V2Al(M2Al),W6Mo5Cr4V2Co5(M35),W2Mo9Cr4VCo8(M42),W4Mo3Cr4VSi(4341),W4Mo2Cr4VSi(4241)

 1. High quality at reasonable price

2. Prompt delivery

3. Rich experience

4. Quick supply of spare parts

5. Professional shipping &package

6. Professional after-sales service

>> Professional:  Proven technique can prove stable products, brought you smooth experience in importing.

>>  High efficiency: we can handle your require swiftly, and will supply good following-service.

>> Experienced: 12 years export experience can make us skilled the clearance documents for you  in short time

We mainly pac them in plywood cases, also we can do as required by customers, we already export to NORWAY, ESTONIA, BELGIUM, SPAIN, CROATIA, RUSSIA, UKRAINE, USA, PAKISTAN, VIET NAM, INDONESIA etc,  Hope you can be the next destination!