Inventronics EUD Series 200W Timer Dimmable Programmable IP67 LED Power Supply

200W LED Power Supply

---------------------------------------------------------------------------------------

Features;

* Ultra High Efficiency (Up to 94.5%)

* Full Power at Wide Output Current Range (Constant Power)

* Thermal Sensing and Protection for LED Module

* 0-10V/PWM/Timer Dimmable (3 Timer Modes )

* Dim-to-Off with Standby Power ≤ 0.5 W

* Always-on Auxiliary Power: 12Vdc, 200mA (Transient Peak Current up to 400mA)

* Output Lumen Compensation

* Input Surge Protection: 6kV line-line, 10kV line-earth

* All-Around Protection: OVP, SCP, OTP

* Waterproof (IP67)

* SELV Output

* Suitable for Independent Use

* 7 Years Warranty

Description;

The EUD-200SxxxDVA series is a 200W, constant-current, programmable LED driver that operates from 90- 305 Vac input with excellent power factor. Created for high bay, high mast, arena and roadway lights, it provides a dim-to-off mode with low standby power. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature.

Models;

Notes;

(1)  Output current range with constant power at 200W

(2) Certified voltage range: 100-240Vac or 127-250Vdc (except CCC, PSE and KS)

(3) Measured at full load and 220Vac input (see below “General Specifications” for details).

(4) SELV Output.

(5) All the models are certificated to KS, except EUD-200S105DVA

Input Specifications;

General Specifications;

Dimming;

Notes;

Time Dimming Time

dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self AdaptingPercentage and Traditional Timer. 

(1) Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two days (if difference <15 minutes), assuming that the center point of the dimming curve is midnight local time.

(2) Self Adapting-Percentage: Automatically adjusts the on-time of each step by a constant percentage = (actual on-time for the past 2 days if difference <15 min) / (programmed on-time from the dimming curve).

(3)Traditional Timer: Follows the programmed timing curve after power on with no changes. 

Output Lumen Compensation

Output Lumen Compensation (OLC) may be used to maintain constant light output over the life of the LEDs by driving them at a reduced current when new, then gradually increasing the drive current over time to counteract LED lumen degradation.

Programming Connection Diagram

Note;The driver does not need to be powered on during the programming process.

Mechanical Outline; 

RoHS Compliance;

Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other hazardous substances from electronic products. 

Q1. What is the warranty of the module?

A1. It's 5 years warranty

Q2. Can we get  samples for testing?

A2. Yes,sample order welcomed.

Q3. What are Constant Power LED drivers?

A3. Constant power comes along with adjustable output current. When output current is adjusted, either through programming or other method, the output voltage range can change correspondingly and the output power remains at maximum