150W LED Driver
---------------------------------------------------------------------------------------
Features;
* Ultra High Efficiency (Up to 94%)
* Full Power at Wide Output Current Range (Constant Power)
* Thermal Sensing and Protection for LED Module
* 0-10V/PWM/Timer Dimmable (3 Ways of Timers)
* Dim-to-Off with Standby Power ≤ 0.5 W
* Always-on Auxiliary Power: 12Vdc, 200mA (Transient Peak Current up to 400mA)
* Output Lumen Compensation
* Input Surge Protection: 6kV line-line, 10kV line-earth
* All-Around Protection: OVP, SCP, OTP
* Waterproof (IP67)
* SELV Output
* Suitable for Independent Use
* 7 Years Warranty
Description;
The EUD-150SxxxDVA series is a 150W, constant-current, programmable LED driver that operates from 90-305 Vac input with excellent power factor. Created for high bay, tunnel and roadway lights, it provides a dim-to-off mode with low standby power. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature.
Models;
Adjustable Output Current Range | Full-Power Current Range (1) | Default Output Current | Input Voltage Range (2) | Output Voltage Range | Max. Output Power | Typical Efficiency (3) | Power Factor | Model Number (4) | |
70-1050mA | 700-1050mA | 700 mA | 90~305 Vac/ 127~250 Vdc | 75~214Vdc | 150W | 94.0% | 0.99 | 0.96 | EUD-150S105DVAV |
140-2100mA | 1400-2100mA | 1400 mA | 90~305 Vac/ 127~250 Vdc | 38~107Vdc | 150W | 94.0% | 0.99 | 0.96 | EUD-150S210DVA(4) |
245-3500mA | 2450-3500mA | 3150 mA | 90~305 Vac/ 127~250 Vdc | 22~61 Vdc | 150W | 93.5% | 0.99 | 0.96 | EUD-150S350DVA (4) |
385-5600mA | 3850-5600mA | 4200 mA | 90~305 Vac/ 127~250 Vdc | 14 ~ 39Vdc | 150W | 92.5% | 0.99 | 0.96 | EUD-150S650DVA (4) |
Notes;
(1) Output current range with constant power at 150W
(2) Certified voltage range: 100-240Vac or 100-250Vdc
(3) Measured at full load and 220Vac input (see below “General Specifications” for details).
(4) SELV Output
Input Specifications;
General Specifications;
Dimming;
Notes;
1.The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like resistors and zener.
2. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly.
3. If 0-10V dimming is not used, Dim + should be open.
Programming Connection Diagram
Note;The driver does not need to be powered on during the programming process.
Mechanical Outline;
RoHS Compliance;
Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other hazardous substances from electronic products.
Q1. What is the warranty of the module?
A1. It's 7 years warranty
Q2. Can we get samples for testing?
A2. Yes,sample order welcomed.
Q3. What are Constant Power LED drivers?
A3. Constant power comes along with adjustable output current. When output current is adjusted, either through programming or other method, the output voltage range can change correspondingly and the output power remains at maximum