Specification | ||
Suitable system | Lithium iron phosphate, lithium cobalt oxide, lithium manganate, graphite, silicon carbon and other system battery positive and negative electrode coating process | |
Coating method | Continuous coating, intermittent coating | |
Number of oven | 3 sections, 1.5 m oven | |
Coating speed | 0~2.5 meters depending on drying conditions | |
Running substrate thickness | Aluminum foil (Al): 8~30um Copper foil (Cu): 8~30um | |
Roll surface design width | 330 mm | |
Ensure coating width | Within 280mm | |
Coating accuracy | ±3um | |
Double-coated film weight accuracy (mg/cm2) | Coating center value ±1.0% | |
Suitable for slurry viscosity | 2000~12000 (mPas) | |
Single-sided coating dry thickness range | 20-200μm | |
Solvent characteristics | Oily solvent NMP(s.g=1.033,b.p=204℃) Aqueous solvent H2O/NMP(s.g=1.000,b.p=100℃) | |
Suitable for solid content range | 20~85% | |
Coating dimensional accuracy (mm) | L≤±1、W≤±0.5 | |
Positive and negative facing accuracy (mm) | L≤±1、W≤±0.5 | |
Certificate | CE Certificate | |
Warranty | One Year limited warranty with lifetime support | |
Coating Equipment Dimensions | L7000 * W1200 * H1800mm | |
Weight | 2T |