Integral drill steel h22 with chisel 40mm
Features
Integral Steel Rod is used by a hand held drill machine in Underground mining and for small hole drilling, equipped with small power rock drills, like air leg rock drills, hand held rock drills, etc. It can reduces the expense of impact energy, improves the drilling speed and efficiency, also it can be used for drilling bore hole diameter from 30mm to 41mm usually.
Integral drill steel h22 with chisel 40mm
Application
Dimensional Stone Quarrying Industry
Underground Mining
Tunneling
Integral drill steel h22 with chisel 40mm
Introduction
Integral Drill Steels are a fixed length with a shank at one end and a bit at the other ,and are able to drill to a depth equivalent to their effective length.The bit may consist of single chisel shaped tungsten carbide insert or three such inserts.
Factory price Integral drill steel with chisel 38mm
To drill deep holes,the rods are designed to be used in a series where the length of any rod used in longer than the one used just before it.
H22 Broca de concel inteqral
To do this ,a series of rods must be produced so that the bit diameter is reduced for each increase in length if rod to prevent jamming of the bit in the hole.
Integral drill steel h22 with chisel 40mm
Name | Shank Size |
Length mm |
Chisel bit Diameter mm |
Drawing |
Integral drill rod | H19x108mm | 400~4000 | 23~35 | |
210~340 | 17~22 | |||
H22x108mm | 400~3200 | 23~29 | ||
400~8000 | 26~41 |
Chisel bit | Cross bit | Button bit |
Integral drill steel h22 with chisel 40mm | ||
Hex. drill rod |
Integral drill steel h22 with chisel 40mm
0
Integral Integral drill steel h22 with chisel 40mm
Integral Integral drill steel h22 with chisel 40mm
Integral Integral drill steel h22 with chisel 40mm
Integral Integral drill steel h22 with chisel 40mm