Technical characteristics |
parameter |
||
AC input |
Input |
Single-phase three-wire system(L/N/PE) |
|
Input voltage(V) |
AC220V |
||
Input Frequency |
Rated input frequency:50/60HZ, Fluctuation range:45Hz~66Hz |
||
Inrush current |
Under rated input conditions, the starting inrush current is not greater than the rated operating state of the input current peak value of 150% (from the current spikes caused by capacitance EMI does not consider) |
||
effectiveness |
≥88% |
||
Input power factor |
≥0.9 |
||
Model |
IPS-RT11010 |
||
DC output |
Output Power(W) |
1100W |
|
Output voltage(V) |
110V DC |
||
Rated output current(A) |
10A |
||
current value s(A) |
11A |
||
Regulators Accuracy |
≤±2V |
||
Broadband noise voltage |
≤50mV (3.4KHZ~150KHz) ≤20mV (0.15KHZ~30MHz) |
||
Discrete frequency noise voltage |
≤5mV (3.4KHZ~150KHz) ≤3mV (150KHZ~200MHz) ≤2mV (200KHz~500KHz) ≤1mV (0.5KHZ~30MHz) |
||
Peak noise voltage |
≤150mV (20MHzbandwidth) |
||
Current capacity of the inter-module (Parallel connection) |
The maximum and the minimum of the following difference 2A (above 10% load) |
||
Security |
insulation strength |
Input to output: 1500VDC input on the chassis: 1500VDC output on the chassis: 500VDC |
|
Leakage current |
<1.5mA |
||
reliability |
MTBF≥100000h |
||
cooling method |
Forced air cooling (internal rectifier DC fans, wind flow 42CFM) |
||
working environment |
Operating temperature |
-10℃~+50℃ |
|
Storage temperature |
-40℃~+85℃ |
||
Relative humidity |
10%~90%(No condensation) |
||
mechanical parameter |
Dimensions |
Width * height * depth:482 mm*88 mm*300mm(10A-60A) Width * height * depth:482 mm*88 mm*350mm(80A-100A) |
|
weight |
8.5 KG(10A-60A),12KG(80A-100A) |
Any further requests for 110vdc switching power supply, please contact IDEALPLUSING.
Regard as 110vdc switching power supply. we can customize as following
(1) Input: 220Vac/110Vac, 45-65HZ.
(2) Output: 24V/48V/110VDC, 5A/10A/15A/20A/25A/30A/50A/60A/75A/120A/150A/200A/450A......
Further information request for 110vdc switching power supply, please contact with IDEALPLUSING Sale team.
Q1. Can I have a sample order of 220vac to 110vdc rectifier ?
A: Yes, sample order is acceptable to test and check quality for the first cooperation
Q2. What about the lead time?
A: Most of model in the stock , sample lead time after receive payment 1-3 working days
Q3. Do you have any MOQ limit?
A: Low MOQ, 1 piece for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. How to proceed an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.
Q6. Is it acceptable to print buyer logo on the product?
A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.
Q7: How to deal with the flaw?
A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%.
Q8: Do you offer a guarantee for the products?
A: Yes, we offer 1-year warranty for all power supply.