Automatic Tyre Inflator
Technical Data Summary
Dimensions (Height*Width*Depth) |
1400mm*500mm*600mm 55.1"*19.7"*23.6" |
Net Weight |
26.7kg/58.7lbs |
Gross Weight |
38kg/83.8lbs |
Packing Size(height*Width*Depth) |
310mm*1420mm*510mm 12.2"*55.9"*20.1"' |
Power Requirement |
24Vdc(2 pcs 12Vdc internal batteries included) 100-240Vac 50 /60HZ charger included |
Power Consumption |
23VA |
Operating Temperature Range |
-20/-4°F to 70 / 158°F |
Max Inlet Air/Nitrogen Supply |
174PSI / 12bar / 1200kPa |
Operating Range |
5-174PSI/0.3-12bar/35-1200kPa |
Over Pressure Setting Range |
0-29PSI/0-2.0bar/0-200kPa |
Nitrogen Purges |
0-9 |
Accuracy |
±1PSI/0.07bar/7kPa |
Resolution |
1PSI/0.1bar/5kPa |
Units of Measurement |
PSI/bar/kPa |
Specifications
1. Adjustable over pressure setting(OPS)
2. Nitrogen purge and fill cycle (N2P)
3. Adjustable number of cycles
4. Adjustable lower purge pressure limit
5. Standard inflate to target
6. 6 air outlets allow simultaneous inflation of up to 6 tires
7. Auto-Start inflation
8. Automatic zero drift adjustment
9. Remain at last setting
10. Comprehensive diagnostics and error reporting
11. Audible and visual end of the cycle signal indicators
12. Large backlight LCD display
13. Vandal resistant mechanical switches
14. Suits Standard nitrogen bottle/Direct nitrogen supply from generator/Air compressor
15. 4 Nos.*8M/26ft standard hoses with single clip-on closed chuck
16. Long life design, up to 2 days of average usage before recharge
Operation Steps
1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.
2. Connect air hose(s) to tyre valve stem(s).
3. FOR TOP-OFF ONLY: Push the “FILL/PURGE” button once.
FOR NITROGEN CONVERSION: Push and hold the “FILL/PURGE” button for 2 seconds until the LCD screen shows “N2P”.
4. When unit “beeps” and the LCD screen flashes the target pressure, tyre inflation is complete.