Industrial factory air filtration system / cyclone dust collector / welding fume extractor

LB-C Muti-Cartridge dust collector 

*Function characteristics: 

1)Low emission concentration, can the filter the dust smaller than 0.2 um. 

2)Good permeability, low gas resistance.  

3)Soot is convenient, automatic dust clean; Ensure the continuity of production and efficiency.  

4)Dust collection container is convenient to disassemble, compact connection with filter funnel, dust does not leak. 

5)Filter cylinder surface is smooth, good waterproof and oil proof performance. 

 **Technical parameters:   

LB-PC Cartridge Filter Dust Collector

**Technical parameters:

 LB-CY Cartridge Filter Dust Collector

 Technical Parameter:  

 Specifications:   

This facility is designed integrated, of tight structure, small footprint, electrinic system with PLC auto-controlled and easy operation.

 This type dust collector equipped with high vacuum fan but with low noise.  

 Imported soft hose, heat and abrasion resistance, smooth inside wall lowered the wind resistance.

LB-GD high Vacuum welding Dust Collector

 Application Place:  

High vacuum model dust collector mainly applied to purification dry, no oil, no corrosion of the smoke gas during welding, cutting and grinding process, can connect with the Robot arm for the operation condition of the robot welding.

 Technical Parameter:  

Product Advantage: 

 This kind of filter with low noise high negative pressure fan, not only with low noise,but also produce quite high negative pressure. Can connect to multiple station convulsions dust removal at the same time.

The equipment adopts the integrated design, compact structure; cover a small area l, and electric control system use PLC for automatic control, easy to operation. The high pressure dust removal system adopts imported and heat-resistant, wear-resistant high pressure composite suction hose, its inner surface smooth wind resistance losses small.

According to the different work station requirements, its methods of catching dust can be used in a high pressure suction mask, universal environmental protection welding torch, grinding wheel.

LB-DY All-in-one Bag Dust Collector

Working principle: The dust from the dust source go through the dust hood and air pipe inlet into the box body, because of the airflow velocity plummeted, sudden expansion, large dust particle size under the action of its weight, separated from the air and into dust drawer. The rest of the dust particles due to the filter bag‘s collision, hook, electrostatic effect, stranded on the inner wall of the filter bag, after purification, the air is being exhausted from the outlet.

Technical Parameter: