UP TO 200 KG
CARDAN BALANCER VTM 88 has a high performance and is used to balance cardan/drive shafts of the cars and trucks. It makes the process of balancing the driveshaft simple thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows your business to grow efficiently.
The machine has high accuracy (1 gmm \ kg). Accuracy is achieved due to the special design of the spindle and the rig of the machine, as well as a reliable balancing system, PAK-4, which has a high degree of noise immunity. Ease of control allows you to quickly learn how to work on the machine and get to work as soon as possible. When designing the machine, high demands were placed on the functionality and versatility of each node, this made it possible to install absolutely any driveshaft on the machine with a minimum of time.
Machine support has a unique design which allows you to implement three schemes for fixing outboard bearings. In addition, the height adjustment of the supports takes little time thanks to the unique design solution light heightR. An important role in the process of quick readjustment of the machine and increasing the level of functionality of the equipment is played by unique technical modifications.
Quickly clamping adapters made by the patented EASY CLAMPR technology can save the time for reinstalling the driveshaft which allowed the use of this machine not only in repair shops but also in serial and small-scale production.
The presence of a movable spindle of the rear spindle it allows, without shifting the support, to move the spindle up to 50 mm for quick installation or removal of the driveshaft
The function of fixing the rotation of the drive spindle which allows you to produce clamping bolts and hold the cardan with one operator without an assistant.
Due to unique design of the construction supports the technology was named LEIGHT HEIGHT.
The supports can be moved along the bed with one hand because they move on rollers along the guides.
Universal clamping system for outboard bearings can also be added to the benefits of bearings. There are three installation schemes implemented on this machine.
In order to fully appreciate the versatility of this equipment mention should also be made about the equipment applied with this machine.
Design features of the machine
FOR ANY DRIVE SHAFT
Drive shaft weight up to 200 kgs
Drive shaft length up to 5200 mm
2-, 3- and 4-support shafts
Universal cam clamping accessories
Central bearing clamp by three methods
SIMPLICITY OF OPERATION
Design is job-proved and time-honoured
Dismountable, serviceable, maintainable
No additional expenses on maintenance and and calibration testing
PAK-4 SPECIAL BALANCING SYSTEM
Real time measuring
Measuring time is 25 seconds
Displays the angle and the load weights for all planes at once
Easy-to-learn, little theoretical knowledge is required
OPTIMUM DESIGN
The most available and the most reliable in the market in this class
It is checked in own division on repair of driveshafts
PAK-4 special balancing system
Digital system on the basis of the industrial fanless computer with the touch screen and the measuring block.
Setup of the machine by 3 starts method with use of calibration weights on serial drive shafts with an initial unbalance.
Calibration of the machine is made by the operator that allows reaching the maximum sensitivity of the machine, and avoids from a duty to pay services in calibration of the machine once a year.
Automatic system of start-up measurement on reaching the adjusted rotation speed.
- Simultaneous balancing in 4 planes, with a possibility of the 2, 3 - plane balancing
- Information on the welding point and load weight is displayed for all planes at the same time.
- The system shows angular position of the driveshaft in real time (the watching system).
- The harmonic test of vibration sensors helps to carry out diagnostics of a mechanical part of cardan (to analyze separate components of vibration and their sources).
- Printing of reports on the carried-out rotor balancing.
Balancing rotors weight range, kg | 3-200 |
Maximum rotor diameter, mm | 150 |
Maximum flange diameter, mm | 300 |
Max. cardan shaft length | 5200 |
Number of bearings | 4 |
Support type | Hard-bearing |
Number of simultaneously measured planes | 2, 3, 4 |
Rotor rotation speed range, rpm | 200-2500 |
Minimal achievable residual specific unbalance, gmm/kg | 5 |
Electric motor power, kW | 3 |
Equipment | Balancing system PAK-4 |
- Easy clampr adapters
- Real time displayed imbalance measuring
- Own advanced measuring system
- Up to 4 supports shaft compatibility
- Self-diagnostics function
- Leight height supports technology
- 5 seconds shaft connection
- Ethernet connection for diagnosis
- Language selection
- Customised print out of balance data
- 17-inch touch screen monitor
- Light height supports
- Simultaneous 4 plane measuring
- 25 seconds measuring time
- Data storage to internal flash memory and usb memory stick
- Operation & service personalized manuals
- Intuitive simple operationing
- High product reliability
- Safety options modifications
- Low-cost spare parts
- Balancer manufacturer since 1973
- Oem and aftermarket repairs
- 12 months warranty
FAST DELIVERY
Worldwide
FREE TRAINING CLASSES
We will teach you how to operate using our machines for 3 days
EASY BOOKING
A $ 1000 Deposit
SAFETY STANDARDS
Industrial design and accessories, security features and interlocks, safety checks
GREAT EQUIPMENT SERVICING
Cheap maintenance due to the collapsible machine design
PREMIUM TECHNOLOGY
You will receive the balancing technology as a bonus when you buy a machine from us
Processing time: | 60-90 days |
Port: | Odessa |
Packaging details: | Wooden Box |
Today the company «VTM Group» is a leading manufacturer of balancing equipment at the territory of CIS and Europe. Our company has come a long way to create a company with a huge scientific and industrial potential. This way, we passed through teamwork and hard work of the whole team and active relationship with the customers of our company. They allow us to get better by actively supporting our initiative to feedback debugging.
At the moment the company «VTM Group» produces equipment with a maximum capacity of up to 65 tons. We produce machines for parts weighing from 1.0 gram The minimum rotor speed on our machine is 150 rpm, min and a maximum of up to 300 000 rpm. min. We produce machines with different principles of operation like soft bearing balancing machine and hard bearing balancing machines.
We train our customers working with our machines and developed a training program to train specialists in repair of cardan shafts and repair of turbochargers.