Industrial acq wood preservative autoclave high frequency vacuum wood drying kiln

(A) The plant injects the medicament into the wood cells and adopts vacuum, frenquency pressure, heating etc a series of process to realize the anti-corrosion, anti-mildew, antimoth;
(B) Working pressure 1-4.0MPa, Vacuum degree -0.098~0MPa;
(C) Working mediums:Water soluble chemical agent, CCA, ACQ.
industrial autoclave for wood Features
1. Wood treatment equipment control system ,makes operation simple, safe, reliable.
2. The absorption medicament quantity for each cubic meter lumber can be measured accurately, and can examine the lumber medicament absorbing capacity to the standard without leaving the pot.
3. Treatment equipment with advanced Rubber sealing ring ,easy to install ,perfect sealing efficiency
4. Q345R material ,the header is whole 16MnR steel plate forging,compression part's welding 's heat treatment and nondestructive test completely suitable for international standard.
industrial autoclave for wood Usage:
Wood impregnation equipment can be used for wood preservation, wood flame-resistant, wood coloring, mainly for timbers. The wood can be used for 15-50years, the wood can adapt to all kinds of environment.
Wood treatment equipment apply to be preservation, termite proof and to prevent fungal.
Types And Standard
ZM-M:design and manufacture as American ASME VIII-1 Inspection Specification for Pressure Vessel
ZM-Z:design and manufacture as Chinese GB150-1998 Steel Pressure Vessel Standard
Two ways of treating wood:
(1)Full-cell process:making wood cells fill with antiseptics.It usually suits the water-soluble antiseptics(eg,CCA,ACQ),and this method can reserve maximum antiseptics.
(2)High&low frequency pressure method:dealing with wood by using atmospheric pressure and pressure periodically.You can get better result,its immersion is much deeper.

Include 8 subsystems, design, techonics, welding, inspection, non-destructive testing, heat treatment, materials physics and chemistry inspection, device management Each process will be strict supervised. 

5 process quality point, Raw material inspection, product specimen, NDT, hydrostatic test, Heat treatment. The products must be inspected by third party before delivery.

Before delivery ,we always check and test every items to make sure our products in good condition.

Reinfore and loading ,make every details better is our service.

 TAIGUO founded since 1976 as the Chinese government appointed Grade A Quality Leading Boiler Manufacturer in China;
Factory area 40000 square meter, total building area 80000 square meters.
Company team: Total about 277 staffs. Chairman 1, CEO 1, Senior Engineer 5, Intermediate Engineers 15, Front-line Staffs 150, Sales 75, After-sale service team 30 (Quality tracking 5, Delivery 5, Installation 20).
Our study team has close relation with the most Chinese famous study institutes
Third party inspection report to reconfirm the final quality: by Zhoukou Institute of Special Equipment Inspection & Technical Research (China official).