Industrial Vacuum Tray Dryer at Wholesale Price

Industrial Vacuum Tray Dryer at Wholesale Price

Vacuum Tray Dryer is suitable for rapid drying of thermal sensitive materials easily resolved, polymerized of deteriorated under higher temperature. Sterilization can be conducted prior to the drying process, during which no matter is allowed to enter the product. Static vacuum dryer eliminates the configuration damage of the drying materials therefore widely used in pharmaceutical, chemicals and foodstuff etc.
Principally, drying under vacuum is environmentally friendly because the Evaporated Solvents can easily be re-condensed. These solvents can then either be recycled or disposed of without any problem.

Drying of solvents in Ex-proof ovens may solve the safety problem in the oven but not the environmental aspect. The solvent vapour is blown out of the oven through the exhaust system Furthermore, there is a risk of uncontrolled mixture formation.

Special Features:

• Main body and door are made in SS 316 with rigid flange
  
• Shelves (hollow type) in SS 316 with baffles
  
• Trays (without back folding) in SS 316
  
• Condenser (shell & tube) and Receiver in SS 304 for solvent recovery
  
• Digital Temperature Indicator (FLP) at H.W. Inlet and Outlet
  
• Digital Temperature Indicator (FLP) at vacuum line
  
• Dial type vacuum gauge in vacuum line
  
• Dial type Temperature gauge in body
  
• Glass view provided on door and receiver
  
• Flow glass provided to monitor condensation between condenser and receiver
  
• Validation port
  
• Provision for Nitrogen purging
  
• Vacuum break valve provided in vacuum line
  
• Construction and finish as per cGMP standards

Tray Dryer Working Principle:

• In tray dryer hot air is continuously circulated. Forced convection heating takes place to remove moister from the solids placed in trays.
  
• Simultaneously the moist air is removed partially.
  
• Wet solid is loaded in to the trays. Trays are placed in the chamber.
  
• Fresh air is introduced through in let, which passes through the heaters and gets heated up.
  
• The hot air is circulated by means of fans at 2 to 5 metre per second.
  
• Turbulent flow lowers the partial vapour pressure in the atmosphere and also reduces the thickness of the air boundary layer.
  
• The water is picked up by the air. As the water evaporates from the surface, the water diffuses from the interior of the solids by the capillary action.
  
• These events occur in a single pass of air. The time of contact is short and amount of water picked up in a single pass is small.
  
• Therefore, the discharged air to the tune of 80 to 90 % is circulated back through the fans. Only 10 to 20% of fresh air is introduced.
  
• Moist air is discharged through outlet. Thus, constant temperature and uniform air flow over the materials can be maintained for achieving uniform drying.
  
• In case of the wet granules as in tablets and capsules drying is continued until the desired moister content is obtained.
  
• At the end of the drying trays or trucks are pulled out of the chamber and taken to a tray dumping station.

Additional:

• Condenser and receiver are made in SS 316
  
• 300 mm wide SS 304 skirting all along the flange
  
• 50 mm thick glass wool insulation on the vacuum chamber outer surface except door. The insulation is enclosed and covered with removable SS 304 angle frame
  
• Digital temperature controller with pneumatic operated valve at hot water/steam inlet
  
• 2 stage water ring type vacuum pumps (partial SS) run by FLP motor
  
• Hot water system with circulation pump

Testing Parameters:

• The vacuum dryer shelves are hydro-tested 5 kg/cm2 assembled condition. The vacuum chamber is tested for leaks under vacuum.

Capacity:

• Standard models range from 3 trays to 96 trays

Applications:

• Chemicals
  
• Dye stuff
  
• Pharmaceutical
  
• Food Products
  
• Colours
  
• Nutraceutical

Click Here to Learn More about our Company >>>