Industrial Sawdust Sand Sludge Sea Salt Single Cylinder Rotary Dryer
Single cylinder Rotary dryer is widely used for drying slag limestone,coal powder,slag,clay,etc.The dryer can also be used in building materials,metallurgy,chemical, and cement industry.Rotary Dryer mainly consists of dryer body,raw material feeding plate,driving and supporting device,seal ring,etc.Dryer can be generally divided into four types,they are rotary dryer,triple-drum dryer,indirect heat transfer dryer,vertical dryer.Different kind of dryer has its own characters and advantages,the specific choice of a special dryer depends on different.
Working principle
1.Materials are sent to the hopper of rotary dryer by belt conveyor or bucket elevator;
2.Materials enter the barrel installed with slope to horizontal line from the higher side,and hot air enters the barrel from the lower side,and the materials and hot air mix together;
3.Materials go to the lower side by gravity when the barrel is rotating;
4.Lifters on the inner side of barrel lift materials up and down in order to make materials and hot air mix completely,which is designed to improve the producing efficiency of rotary dryer.
Rotary Dryer Features
1.Our dryer adopts new Spreading plate device,which has guidance,flow,material functions;
2.It can make the material contained in the dryer radial cross-section to full uniform,the material will become thin and all;
3.The state of the heat flow entirely,to achieve the purpose of making full use of the heat;
4.Our dryer chooses reasonable operating parameters,coal consumption and power consumption of general baked dry machine more than 10-15%,one machine yields above 10-15%;
5.It has been widely used in the cement and mineral processing enterprise.
|
Specification |
Cylinder volume |
Capacity
(t/h) |
Installation slope
(°) |
Max. intake temperature
(℃) |
Motor power
(kw) |
weight
(t) |
|
∅0.6×8 |
2.2 | 0.3-0.5 | 3-5 | 700-800 | 3 | 1.9 |
|
∅1.0×10 |
7.85 |
1.2-2.0 | 5.5 | 6 | ||
|
∅1.2×10 |
11.3 | 2.4-3.0 | 7.5 | 11 | ||
|
∅1.5×12 |
21.2 | 4.5-5.7 | 15 | 18.5 | ||
| ∅1.5×15 | 26.5 | 5.7-7.1 | 15 | 20.5 | ||
| ∅1.8×12 | 30.5 | 6.5-8.1 | 18.5 | 21.3 | ||
| ∅1.8×14 | 35.6 | 7.6-9.5 | 18.5 | 23 | ||
| ∅2.2×12 | 45.6 | 9.7-12.2 | 22 | 33.5 | ||
| ∅2.2×16 | 60.8 | 13.0-16.2 | 22 | 38 |
A standard package in wooden boxes or containers.
The Nile Co.,Ltd.is committed to designing,producing grinding mills,crushers,conveyors,feeding machines,drying and calcinating as well as beneficiation equipment,fine sand recycling equipment etc,which are widely applied in electricity,metallurgy,mine and quarry, wharf,granary,chemical industry.Our products have been spread all over China,and also exported to European,American,Asian,African countries and enjoyed great popularity among our customers.
Our company owns an experienced and skilled sales and service team which compose a perfect service network.We will send the professional engineers to the installation sites and provide guidance for the installation,commissioning and initial run as well as planning administration of the equipments after purchase.
We can not only provide good quality sand making machine, but also provide the best service for our clients. The series of professional technology services will make you have an excellent product experience.
Pre-sale services:
(1) The advice of model choice.
(2) Design and manufacture machines according to customer's special requirements
(3) The company is free of charge to the user on-site engineering and technical personnel planning site for the user to design the best processes and program
After-sale services :
(1) Arrange technicians to go to the site to guide installation
(2) If your machine is out of warranty period, you can go to the Nile's overseas office to buy spare parts.
(4) complete sets of equipment installed, 1-2 full-time technical staff to stay free of charge to help customers on-site production of 1 month, until the user' satisfaction.
Q1: Are you factory or trade company?
A1: We are factory.
Q2: Where your products have been exported before?
A2: Our products have been sold to South Asia, Africa, South America, middle East and so on.
Q3: How will you help the customer to install the equipment?
A3: Our senior engineer will guide the installation and commissioning as well as the initial production at
Q4: How about the wear parts supply?
A4: We offer wear parts to our customer with our most favorable price. If there are problems youcould not handle, we will send our technicians to your place and you are therefore, responsible for all thecost involved.
Q5: What about the payment method?
A5:T/T, L/C Paypal is available
Q6: What about after-sale service?
A6:12 months warranty for all kinds of products.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier