Industrial Plastic Pellet Drying Mixer Machine with Heater

1. The standard model adopts double-layer designed,both of layers are made of stainless steel,durable and easy to
clean.The outside layer is made of A3 steel plate or stainless steel,the intermediate layer is installed heat insulating
material so that heat quantity not easy to lost,save energy and safe.
2. Hot air port designed specially,configure with high pressure drying special blower,rapid penetration of hot air, the
material is heated evenly and dry fast.
3. High frequency heater,less electricity and large heat quantity.
4. Adopts cabinet electricity control box,various functions are absolutely clear.
5. The operation is more humanized because of a variety of alarm function,
6. The dust collecting bag is configured to facilitate dust collection, and does not pollute the working place, and the
workshop is clean.
7. Drying and mixing function are two-in-one.The machine can be used for mixing and homogenizing material when
turning off drying function.

1. It mainly used in drying and mixing plastic granule, crushed material, plastic sheet and so on.
2. Mixing and drying at the same time. The materials keeping flow state in the drying process so that the heat quantity
 penetrates equably, the drying time being short and not easy to getting agglomerate.
3. Double barrel designed, the contact parts with material are all made of stainless steel, the middle layer is installed
 special moisturizing material thus to safety and energy-saving.
4. A high frequency heater, fast heating, less power consumption, comprehensive cost per ton of drying material is about 25-30 RMB per ton. ( The percentage of moisture is below 1% and power cost 0.9 RMB / kwh, tested by PP granulation
and mode LC-1000+ ) .
5. Double exhaust port, exhausting moisture effectually, collecting dust, and no pollution.
6. Changing material or pigment conveniently and simply owing to the barrel with entrance gate.